Laporkan Masalah

REDRAWING BODI MOBIL MODEL ARZ V10 DENGAN CREO PARAMETRIC 2.0

TATAS AZIZ, Ir. Bambang Suharnadi, M.T

2017 | Tugas Akhir | D3 TEKNIK MESIN SV

Bodi mobil merupakan hal pertama yang diperhatikan oleh seorang pengguna. Desain bodi mobil yang baik dapat memberikan nilai lebih dalam persaingan di lapangan. Dalam pembuatan sebuah desain bodi mobil, pada awalnya sketch bodi digambar secara manual. Dengan berkembangnya teknologi pada saat ini proses desain tidak berhenti pada gambar secara manual saja, namun mulai digunakan software pada komputer, salah satu software untuk mendesain bodi mobil adalah Creo Parametric 2.0, dimana software ini mampu menyajikan gambar baik secara 2D maupun 3D. Tujuan dari penelitian ini adalah untuk membuat redrawing bodi mobil model ARZ V10 dengan menggunakan software Creo Parametric 2.0. Dalam pembuatan redrawing bodi mobil ini terdapat beberapa langkah yang digunakan. Langkah pertama dalam membuat redrawing bodi mobil adalah dengan mengimpor sketch atau blue print mobil ke software Creo Parametric 2.0 dengan ukuran sketch sesuai dengan ukuran sebenarnya. Tahap kedua adalah membuat kurva berdasarkan sketch tersebut kemudian membuat permukaan (surface) dari kurva-kurva yang sudah dibuat. Hasil penelitian ini adalah redrawing bodi mobil model ARZ V10 dengan memanfaatkan fitur-fitur surface modeling pada software Creo Parametric 2.0. Fitur ini sangat membantu dan memudahkan dalam pembuatan tugas akhir ini.

The car body is first thing that noticed by a user. Good car body design can provide more value in the competition in the field. In the making of a car body design, at first time the sketch of body drawn manually. With the development of technology at this time the design process does not stop on the picture manually, but began to use the software on the computer, one of the software to design the car body is Creo Parametric 2.0, where the software is able to present images both in 2D and 3D. The purpose of this study is to redrawing the car body model ARZ V10 using the Creo Parametric 2.0 software. In making the redrawing of this car body there are several steps that are used. The first step in redrawing the car body is to import a sketch or blue print car to the Creo Parametric 2.0 software with the size of the sketch match with the actual size. The second stage is to make the curve based on the sketch and then create the surface of the curves that have been made. The results of this study is the redrawing the car body model ARZ V10 by utilizing surface modeling features in the Creo Parametric 2.0 software. This feature is very helpful and facilitate in making this final project.

Kata Kunci : desain, redrawing, surface modeling

  1. D3-2017-368149-abstract.pdf  
  2. D3-2017-368149-bibliography.pdf  
  3. D3-2017-368149-tableofcontent.pdf  
  4. D3-2017-368149-title.pdf