Laporkan Masalah

Perancangan dan Analisis Komparatif Buck Converter Berbasis IC SG3524 dengan Proteksi Overcurrent dan Shutdown: Studi Simulasi LTspice dan Implementasi Perangkat Keras

Iwan Nugroho, Dr.-Ing. Yohan Fajar Sidik, S.T., M.Eng.; Husni Rois Ali, S.T., M.Eng., Ph.D., DIC., SMIEEE.

2026 | Skripsi | TEKNIK ELEKTRO

Konverter DC-DC merupakan komponen kunci dalam sistem elektronika daya, dan kebutuhan terhadap konverter yang efisien sekaligus andal terus meningkat seiring meluasnya penerapannya pada sektor energi terbarukan, penyimpanan energi, hingga catu daya sistem digital. Selain akurasi regulasi tegangan, keandalan terhadap kondisi operasional abnormal—seperti arus lebih—menjadi aspek penting dalam perancangan konverter. Dalam konteks tersebut, konverter DC-DC tipe buck berbasis IC SG3524 relevan digunakan dalam sistem catu daya elektronika daya karena mengintegrasikan kendali PWM, proteksi arus lebih, dan shutdown dalam satu kemasan. Penelitian ini merancang buck converter 12 V–5 V berbasis IC SG3524 dengan sistem kontrol closed-loop voltage mode control dan memvalidasinya melalui analisis komparatif antara simulasi LTspice dan implementasi perangkat keras. Metodologi yang digunakan adalah membangun model behavioral IC SG3524 di LTspice berdasarkan spesifikasi datasheet, kemudian menguji prototipe PCB pada variasi beban resistif dan skenario proteksi. Hasil penelitian menunjukkan bahwa kompensator yang dirancang berhasil menstabilkan tegangan keluaran dengan load regulation 0,28% pada seluruh rentang beban operasi. Model behavioral terbukti akurat dalam memprediksi regulasi tegangan steady-state dengan pola yang konsisten terhadap perangkat keras, dan juga mereproduksi perilaku proteksi arus lebih secara wajar: deviasi arus trip terhadap nilai teoritis hanya membesar moderat dari 9,1% pada simulasi menjadi 25,6% pada perangkat keras, sementara tegangan titik kerja fold-back kedua domain nyaris berimpit (2,94 V pada simulasi dan 3,013 V pada perangkat keras). Proteksi overcurrent dan shutdown berhasil diverifikasi aktif di kedua domain, mengonfirmasi keandalan fitur proteksi bawaan IC SG3524 dalam kondisi operasional nyata dengan hanya menyisakan deviasi moderat pada arus rata-rata yang terbatasi. Analisis sensitivitas parametrik terhadap induktansi, kapasitansi filter, ESR kapasitor, frekuensi pensaklaran, tegangan masukan, dan resistor sensing mengonfirmasi ketegaran desain sekaligus menjelaskan trade-off-nya—ripple arus induktor berbanding terbalik dengan induktansi, ripple tegangan naik dengan ESR, frekuensi lebih tinggi menekan ripple, dan ambang batas arus menskala dengan resistor sensing—sementara analisis domain frekuensi menunjukkan loop mempertahankan phase margin yang lebar (>45°) di seluruh rentang beban. Analisis komparatif juga mengungkap pengaruh parasitik komponen fisik—seperti ESL kapasitor dan impedansi jalur PCB—terhadap ripple tegangan dan karakteristik proteksi arus, yang menjadi temuan kuantitatif berharga untuk pengembangan model simulasi yang lebih akurat ke depannya.

DC-DC converters are a key component of power electronics systems, and the demand for converters that are both efficient and reliable continues to grow as their use expands across renewable energy, energy storage, and digital power-supply applications. Beyond output-voltage regulation, reliability against abnormal operating conditions—such as overcurrent—is an important aspect of converter design. In this context, the SG3524-based DC-DC buck converter is relevant for power electronics supply systems due to its integrated PWM control, overcurrent protection, and shutdown features in a single package. This study designs a 12 V-to-5 V buck converter based on the SG3524 IC with a closed-loop voltage mode control system and validates it through a comparative analysis between LTspice simulation and hardware implementation. The methodology involved building a behavioral model of the SG3524 IC in LTspice from datasheet specifications, followed by testing a PCB prototype across resistive load variations and protection scenarios. Results show that the designed compensator successfully stabilized output voltage with a load regulation of 0.28?ross the full operating load range. The behavioral model proved accurate for steady-state voltage regulation, showing consistent trends with the hardware, and also reproduced the overcurrent protection behavior reasonably well: the trip-current deviation from the theoretical value increased only moderately from 9.1% in simulation to 25.6% on hardware, while the fold-back operating voltages of the two domains nearly coincided (2.94 V in simulation versus 3.013 V on hardware). Both overcurrent and shutdown protection were verified to operate correctly in both domains, confirming the reliability of SG3524 built-in protection features under real operating conditions, with only a moderate residual deviation in the average limited current. A parametric sensitivity analysis of the inductance, filter capacitance, capacitor ESR, switching frequency, input voltage, and current-sense resistance confirmed the robustness of the design and clarified its underlying trade-offs—inductor-current ripple scales inversely with inductance, output ripple grows with ESR, higher switching frequency lowers ripple, and the current-limit threshold scales with the sense resistor—while a frequency-domain analysis showed the loop retained an ample phase margin (>45°) across the operating load range. The comparative analysis also revealed quantitative insights into the influence of physical component parasitics—such as capacitor ESL and PCB trace impedance—on output ripple and protection characteristics, providing valuable data for the development of more accurate simulation models in future work.

Kata Kunci : buck converter, IC SG3524, voltage mode control, pemodelan behavioral, proteksi overcurrent, analisis sensitivitas

  1. S1-2026-498095-abstract.pdf  
  2. S1-2026-498095-bibliography.pdf  
  3. S1-2026-498095-tableofcontent.pdf  
  4. S1-2026-498095-title.pdf