Laporkan Masalah

Design and Implementation of a Pellet Mill Operation Panel Based on PLC and SCADA

Muhammad Zaki Muharram, Dr. Ir. Fahmizal, S.T., M.Sc., IPM.

2026 | Tugas Akhir | D4 TEKNOLOGI REKAYASA ELEKTRO

Penelitian ini bertujuan untuk merancang dan mengimplementasikan panel operasi pellet mill berbasis Programmable Logic Controller (PLC) dan Supervisory Control and Data Acquisition (SCADA) guna mengatasi keterbatasan sistem operasi pellet mill konvensional yang umumnya belum memiliki monitoring terpusat, sistem proteksi otomatis, serta akuisisi data operasional secara real-time. Prototipe yang dikembangkan menggunakan PLC Lollete LU48-MR yang diprogram dengan metode Ladder Diagram menggunakan perangkat lunak GX Developer untuk mengendalikan urutan penyalaan motor pellet mill, conditioner, dan feeder dengan jeda waktu 5 detik. Sistem kendali juga dilengkapi dengan mekanisme interlock serta sistem proteksi fail-safe menggunakan Over Current Relay (OCR) dan Emergency Stop (E-Stop). Akuisisi variabel proses dilakukan menggunakan sensor proximity yang terhubung ke fitur High Speed Counter (HSC) pada PLC untuk pengukuran kecepatan putar (RPM) serta sensor termokopel tipe-K dengan transmitter 4–20 mA untuk pemantauan temperatur. Komunikasi antara PLC dan Haiwell Cloud SCADA menggunakan protokol Modbus RTU melalui jaringan komunikasi RS-485.

Hasil pengujian menunjukkan bahwa seluruh fungsi kendali, monitoring, dan proteksi bekerja sesuai dengan spesifikasi perancangan. Sistem kendali berurutan berhasil mengaktifkan motor dengan jeda waktu 5 detik sesuai program, sedangkan sistem proteksi mampu merespons kondisi beban lebih dan keadaan darurat dengan baik. Waktu respons proteksi terhadap beban lebih tercatat sebesar 36,17 detik pada bagian conditioner dan 25,92 detik pada bagian pellet mill. Antarmuka SCADA mampu menampilkan status motor, kecepatan putar, temperatur, serta kondisi alarm secara real-time dan stabil selama proses pengoperasian. Perbandingan hasil pengukuran RPM antara indikator panel dan SCADA menunjukkan deviasi sebesar 1–10 RPM sehingga menunjukkan konsistensi kinerja sistem monitoring. Selain itu, fitur historical data logging berhasil merekam data operasional setiap interval 10 detik, sedangkan komunikasi PLC dan SCADA tetap stabil dengan rata-rata waktu respons sekitar 1 detik tanpa kehilangan komunikasi maupun data selama pengoperasian. Hasil penelitian ini menunjukkan bahwa panel operasi pellet mill berbasis PLC dan SCADA yang dikembangkan mampu menyediakan sistem kendali yang andal, monitoring real-time yang efektif, peningkatan aspek keselamatan operasional, serta pengelolaan data historis yang efisien sehingga layak diterapkan sebagai solusi otomasi industri pada sistem operasi pellet mill.

This research presents design and implementation of pellet mill operation panel based on PLC and SCADA to overcome the limitations of conventional pellet mill operation systems, which generally lack centralized monitoring, automated protection, and real-time operational data acquisition. The developed prototype employs a Lollete LU48-MR PLC programmed using the Ladder Diagram method in GX Developer to execute sequential motor control with 5-second delays between the pellet mill, conditioner, and feeder motors. The control system also incorporates an interlock mechanism and a fail-safe protection scheme using an Over Current Relay (OCR) and an Emergency Stop (E-Stop). Process variables are acquired through a proximity sensor connected to the PLC High Speed Counter (HSC) for rotational speed measurement and a Type-K thermocouple with a 4-20 mA transmitter for temperature monitoring. The PLC communicates with the Haiwell Cloud SCADA platform via the Modbus RTU protocol over an RS-485 communication network. Experimental results demonstrated that all control, monitoring, and protection functions operated according to the design specifications. The sequential control successfully executed motor startup with the programmed 5-second intervals, while the protection system responded correctly to overload and emergency conditions. The measured overload response times were 36.17 s for the conditioner section and 25.92 s for the pellet mill section. The SCADA interface provided stable real-time visualization of motor status, rotational speed, temperature, and alarm conditions throughout system operation. Comparison of RPM measurements between the panel indicator and the SCADA system showed a deviation of only 1-10 RPM, indicating consistent monitoring performance. Furthermore, the historical data logging function successfully recorded operational data at 10-second intervals, while PLC-SCADA communication remained stable with an average response delay of approximately 1 s, without communication loss or data loss during continuous operation. These results demonstrate that the proposed PLC and SCADA based Pellet Mill Operation Panel provides reliable control, effective real-time monitoring, improved operational safety, and efficient historical data management, making it suitable as an industrial automation solution for pellet mill operations.

Kata Kunci : Pellet Mill Operation Panel, Industrial Automation, PLC, SCADA, Real Time Monitoring

  1. D4-2026-504928-abstract.pdf  
  2. D4-2026-504928-bibliography.pdf  
  3. D4-2026-504928-tableofcontent.pdf  
  4. D4-2026-504928-title.pdf