Laporkan Masalah

PENGARUH KONSENTRASI NATRIUM HIPOKLORIT SEBAGAI BAHAN IRIGASI DAN JENIS BAHAN BONDING TERHADAP KEBOCORAN MIKRO RESIN KOMPOSIT BULKFILL VISKOSITAS RENDAH PADA DENTIN KAMAR PULPA

BRIGITTA NATANIA RP, Pribadi Santosa, Ema Mulyawati

2015 | Tesis-Spesialis | SP ILMU KONSERVASI GIGI

Prosedur preparasi dan sterilisasi dalam perawatan saluran akar membutuhkan larutan irigasi natrium hipoklorit. Konsentrasi natrium hipoklorit yang dapat dipakai adalah 2,5-5,25%. Irigasi natrium hipoklorit dapat mengubah struktur dentin kamar pulpa. Pembuatan restorasi akhir dapat dilakukan dengan resin komposit bulkfill. Ikatan yang baik antara resin komposit dan gigi dapat dicapai dengan bahan bonding total-etch maupun self-etch dan diukur dari tingkat kebocoran mikro yang terjadi. Penelitian ini bertujuan untuk mengetahui adanya pengaruh konsentrasi natrium hipoklorit sebagai bahan irigasi dan jenis bahan bonding terhadap kebocoran mikro resin komposit bulkfill viskositas rendah pada dentin kamar pulpa. Penelitian dilakukan pada 24 gigi premolar yang dibagi menjadi tiga kelompok (kontrol, NaOCl 2,5% dan EDTA 17%, NaOCl 5,25% dan EDTA 17%). Spesimen dibagi menjadi dua sub-kelompok (bahan bonding total-etch dan bonding self-etch). Kavitas pada seluruh spesimen ditutup dengan resin komposit bulkfill viskositas rendah. Spesimen gigi disentrifugasi dan direndam dalam larutan metilen biru 2% kemudian dibelah secara longitudinal. Penetrasi zat warna metilen biru diukur dengan mikroskop stereo. Analisis data dilakukan dengan uji ANAVA dua jalur (tingkat kepercayaan 95 %) dilanjutkan dengan uji LSD. Hasil penelitian menunjukkan bahwa rerata kebocoran mikro paling tinggi berada pada konsentrasi natrium hipoklorit 5,25% dan bahan bonding total-etch. Berdasarkan uji ANAVA, konsentrasi natrium hipoklorit dan jenis bahan bonding berpengaruh secara signifikan terhadap kebocoran mikro tetapi tidak ada interaksi pengaruh keduanya. Kesimpulan dari penelitian ini adalah konsentrasi natrium hipoklorit 5,25% dan bahan bonding total-etch mengakibatkan terjadinya kebocoran mikro resin komposit bulkfill viskositas rendah yang lebih tinggi pada dentin kamar pulpa.

Instrumentation and sterilisation in root canal treatment procedure needs sodium hypochlorite as irrigation solution. Sodium hypochlorite is commonly used in the range of 2,5-5,25% concentration. Irrigation using sodium hypochlorite changes the structure of pulp chamber dentin. Final restoration can be established with bulkfill composite resin. Adhesion between composite resin and tooth structure is achieved by using either total-etch or self-etch adhesives and measured by microleakage rate. The aim of this research is to study influence of sodium hypochlorite concentration as irrigation material and adhesive systems to low-viscosity bulkfill composite resin microleakage on pulp chamber dentin. Twenty-four premolars were divided into three groups (control, NaOCl 2,5% and EDTA 17%, NaOCl 5,25% and EDTA 17%). Each group was divided into two subgroups (total-etch and bonding self-etch). Cavities on all specimens were restored with low-viscosity bulkfill composite resin. Specimens were centrifugated and soaked in methylene blue 2% then sectioned longitudinally. Methylene blue penetration was measured by stereomicroscope. Data was statistically analyzed with two-way ANOVA followed by LSD. Results showed that higher microleakage found in 5,25% concentration and total-etch group. Based on ANOVA test, sodium hypochlorite concentration and adhesive systems significantly influence microleakage. It can be concluded that 5,25% concentration sodium hypochlorite and total-etch adhesive resulted in higher microleakage of low-viscosity bulkfill composite resin on pulp chamber dentin.

Kata Kunci : natrium hipoklorit, total-etch, self-etch, resin komposit bulkfill, kebocoran mikro


    Tidak tersedia file untuk ditampilkan ke publik.