Laporkan Masalah

Impregnasi Fe(III) ke dalam Pori MCM-41 Hasil Sintesis secara Sonokimia

MIKA KESUMA, Dr. Suyanta, M.Si.; Prof. Dr. Bambang Rusdiarso, DEA

2015 | Skripsi | S1 KIMIA

Impregnasi Fe(III) ke dalam pori MCM-41 yang disintesis secara sonokimia dengan bahan dasar sekam padi telah berhasil dilakukan. Tujuan dari penelitian ini adalah untuk mempelajari penggunaan sekam padi sebagai sumber silika dalam sintesis MCM-41, pengaruh waktu sonikasi terhadap kristalinitas MCM-41, pengaruh impregnasi Fe(III) secara post synthesis terhadap kristalinitas dan diameter pori MCM-41, serta pengaruh pH terhadap persentase Fe(III) dalam FeO/MCM-41 hasil sintesis. MCM-41 disintesis dari silika yang diperoleh dari ekstraksi sekam padi. Sintesis MCM-41 dilakukan dengan metode sonokimia dengan variasi waktu sonikasi. MCM-41 hasil sintesis dengan waktu sonikasi optimum, kemudian diimpregnasi dengan logam Fe(III) secara post synthesis dengan variasi pH. Hasil sintesis dikarakterisasi dengan FTIR, XRD, isoterm adsorpsi-desorpsi gas N2, dan TEM. Hasil penelitian menunjukkan bahwa waktu sonikasi optimum untuk sintesis MCM-41 adalah 180 menit, dengan luas permukaan sebesar 794,72 Amstrong dan diameter pori sebesar 31,86 Amstrong. Impregnasi Fe(III) ke dalam MCM-41 secara post synthesis menghasilkan MCM-41 dengan kristalinitas dan diameter pori yang rendah karena keberadaan Fe(III). Kenaikan pH Fe(III) menyebabkan penurunan kristalinitas dan diameter pori MCM-41. pH optimum yaitu pH 1 menggunakan Fe(III) 0,1 M dengan persentase Fe(III) yang berada pada pori MCM-41 sebesar 1,7%.

Impregnation of Fe (III) into the pores of MCM-41 was synthesized by sonochemical method from rice husk as raw material has been carried out. The aim of this research was to studied the use of rice husk as a silica source in the synthesis of MCM-41, the effects of sonication time to the crystallinity of MCM-41, the impregnation effects of Fe (III) by post-synthesis method to the crystallinity and pore size of MCM-41, and the pH effect of Fe(III) percentage onto FeO/MCM-41. MCM-41 was synthesized from silica that obtained from rice husk extraction. Synthesis of MCM-41 by sonochemical method with various sonication time has been carried out. MCM-41 synthesized with optimum sonication time, then impregnated with Fe (III) by post-synthesis with various pH. All of the product were characterized by FTIR, XRD, adsorption-desorption isotherms of N2 gas, and TEM. The results showed that the optimum sonication time to synthesize MCM-41 was 180 minutes, its surface area was 794.72 Amstrong and its pore size was 31.86 Amstrong. Impregnation of Fe (III) to the MCM-41 by post-synthesis produced MCM-41 with lower crystallinity and pore size due to the presence of Fe (III). The increase pH of Fe (III) was decrease the crystallinity and pore size of MCM-41. The optimum pH was pH 1 using Fe (III) 0.1 M and the percentage of Fe(III) onto FeO/MCM-41 pores was 1.7%.

Kata Kunci : ekstraksi, sonokimia, MCM-41, impregnasi, FeO/MCM-41

  1. S1-2015-297535-abstract.pdf  
  2. S1-2015-297535-bibliography.pdf  
  3. S1-2015-297535-tableofcontent.pdf  
  4. S1-2015-297535-title.pdf