PEMANFAATAN DRY BEADS Ca ALGINAT BENTONIT DAN Fe ALGINAT BENTONIT : KAJIAN ADSORPSI ION FOSFAT DALAM AIR LAUT
IKA OKTAPIANY, Dr.rer.nat Nurul Hidayat A., M.Si. , Suratno, S.Si., M.Sc.
2014 | Skripsi | KIMIATelah dilakukan penelitian pemanfaatan dry-beads Ca alginat bentonit dan Fe alginat bentonit untuk adsorpsi ion fosfat pada air laut. Penelitian ini dilaksanakan melalui beberapa proses meliputi proses pembuatan dan karakterisasi adsorben dengan menggunakan Fourier Transform Infrared (FTIR), Scanning Electron Microscopy Energy Dispersive Spectroscopy (SEM-EDS), dan Surface Area Analyzer (SAA) dan adsorpsi ion fosfat pads sistem batch pada suhu ruang dengan variasi massa adsorben, pH, waktu kontak dan konsentrasi adsorbat. Karakterisasi dry-beads dengan menggunakan FTIR menunjukkan adanya bilangan gelombang baru pada adsorben setelah proses adsorpsi yaitu pada 1095, 300 dan 400 cm-1 yang mengindikasikan adanya gugus PO43- secara berturut turut untuk dry-beads Ca alginat bentonit dan Fe alginat bentonit. Foto SEM menggambarkan permukaan Fe alginat bentonit yang seragam. Adsorpsi ion fosfat dengan menggunakan Ca alginat bentonit dan Fe alginat bentonit (7-8). Kinetika adsorpsi Ca alginat bentonit mengikuti model pseudo orde satu Lagergren dengan nilai k1 0,02 /menit dan Fe alginat bentonit mengikuti model pseudo orde 2 Ho dengan nilai k2 0,01 g/mg.menit. Adsorpsi ion fosfat dengan Ca alginat bentonit tergolong fisisorpsi dengan ED 2,89 kJ/mol, luas permukaan dan ukuran pori adsorben 7,98 m2/g dan 0,18 nm sementara Fe alginat bentonit tergolong kemisorpsi dengan ED 8,45 kJ/mol dan energi bebas Gibss 27,30 kJ/mol.
The utilization of Ca alginate bentonite and Fe alginate bentonite dry beads for adsorption of phosphate ion in seawater has been performed. This research was conducted by several steps i.e : synthesis and characterization of adsorbent using Fourier Transform Infrared (FTIR), Scanning Electron Microscopy Energy Dispersive Spectroscopy (SEM-EDS), and Surface Area Analyzer (SAA) and adsorption of phosphate ion in seawater using batch system at room temperature with adsorbent mass, pH, contact time and ion phosphate concentration variations. Dry beads characterization using FTIR showed that the adsorbents have new wavelength number after adsorption at 1095, 300 and 400 cm-1 as PO43- vibration on Ca alginate bentonite dry beads and Fe alginate bentonite dry beads.The SEM image showed that the surface condition of Fe alginate bentonite was smooth. Adsorption of phosphate ion using Ca alginate bentonite and Fe alginate bentonite gave the adsorbent capacity 0.27 and 1.48 mg/g at optimal pH condition (7-8). Adsorption kinetic of Ca alginate bentonite followed Lagergren model by pseudo first orde with k1 0.02 /minute and Fe alginate bentonite followed Ho model by pseudo second orde with k2 0.01 g/mg.minute. Adsorption of phosphate ion using Ca alginate bentonite was classified in fisisorption type with ED 2.89 kJ/mol, surface area 7.98 m2/g and pore radius 0.18 nm while Fe alginate bentonite adsorbent was a chemisorption type with ED 8.45 kJ/mol and Gibbs free energy 27.30 kJ/mol.
Kata Kunci : adsorpsi, alginat, bentonit, ion fosfat, air laut