PENGARUH PERUBAHAN BEBAN PADA OPERASI PARALEL GENERATOR SINKRON DAN GENERATOR INDUKSI DENGAN PEMASANGAN ST ATCOM MENGGUNAKAN MATLAB
MUKHLIS NUR AFIFI, Ir. M. Isnaeni B.S., MT.
2014 | Skripsi | TEKNIK ELEKTROParalel generator sinkron dan generator induksi adalah salah satu ciri dari pada distributed generation (DG). Pada sistem ini kebutuhan daya reaktif generator induksi disuplai oleh generator sinkron. Pada DG, sistem bersifat statis artinya tidak ada kontrol pengaturan beban saat beban berubah. Saat beban berubah maka kebutuhan akan daya aktif dan reaktif akan berubah pula. Simulasi ini bertujuan untuk mengetahui efek pemasangan STATCOM pada saat terjadi perubahan beban R dan RL. STATCOM berfungsi mengatur tegangan dan menyerap atau menyuplai daya reaktif. Simulasi dilakukan dengan Simulink pada MATLAB 2011a. Simulasi yang dilakukan antara lain untuk mengetahui kestabilan tegangan dan kecepatan rotor saat terjadi proses perubahan beban pada operasi paralel generator sinkron dan generator induksi. Dibandingkan antara tidak terpasang STATCOM dan terpasang STATCOM.
Parallel between synchronous generator and induction generator is one of the characteristics in the distributed generation (DG). In this system needs an induction generator reactive power supplied by the synchronous generator. In the DG, the system is static. Static hasn’t load setting control when the load changes. When the load changes,the needs for active and reactive power will change as well. This simulation aims to determine the effect of STATCOM installation in the event of changes in the load R and RL. STATCOM regulates voltage and absorb or supply reactive power. Simulations performed with Simulink in MATLAB 2011a. Simulations were carried out, among others, to determine the voltage stability and rotor speed stability during a process of change in the load on the parallel operation of synchronous generators and induction generators. In comparison between STATCOM and not attached STATCOM installed.
Kata Kunci : Generator sinkron, Generator Induksi, kerja paralel, perubahan beban, STATCOM