Laporkan Masalah

KAJIAN FOTOREDUKSI IONCr(VI) DENGAN MENGGUNAKAN FOTOKATALIS TiO2-RESIN

BAIQ INGGAR LINGGARWENI, SP, Prof. Dr. Mudasir, M.Eng.

2014 | Tesis | S2 Ilmu Kimia

Pada penelitian ini dilakukan pengembanan TiO2 pada resin penukar kation yang diikuti dengan karakterisasi dan uji kinerja fotokatalis TiO2-resin untuk proses fotoreduksi ion Cr(VI). Pada proses pengembanan digunakan metode pertukaran ion dengan cara menukarkan ion Ti(IV) dari Titanium isopropoksida dalam larutan etanol dan air ditambah 1 gram resin penukar kation yang dilanjutkan dengan kalsinasi pada suhu 200oC. Karakterisasi dilakukan dengan metode difraksi sinar X (XRD). Fotoreduksi dilakukan dengan sistem batch, dandalam proses ini dipelajari pengaruh waktu penyinaran, massa fotokatalis dan konsentrasi ion Cr(VI). Hasil penelitian menunjukkan bahwa pengembanan TiO2 pada resin dapat meningkatkan aktivitas fotokatalisnya pada reaksi reduksi ion Cr(VI). Waktu penyinaranberpengaruh nyata pada hasil fotoreduksi ion Cr(VI) yang terkatalisis TiO2-resin. Bertambahnya waktu penyinaran sampai 24 jam dapat meningkatkan efektivitas fotoreduksi ion Cr(VI), sedangkan waktu penyinaran lebih dari 24 jam menurunkan efektivitas fotoreduksi ion Cr(VI). Pada penggunaan fotokatalis dengan massa sampai 50 mg proses fotoreduksi ion Cr(VI) berlangsung semakin efektif namun dengan penambahan massa fotokatalis yang lebih besar dari 50 mg tidak meningkatkan fotoreduksi ion Cr(VI). Fotoreduksi ion Cr(VI) terkatalisis TiO2-resin pada konsentrasi Cr(VI) yang rendah berlangsung sempurna namun untuk konsentrasi yang lebih besar fotoreduksi mengalami penurunan.

In this research preparation of TiO2 on cation exchange resin followed by characterization and performance tests TiO2-resin photocatalyst for the photoreduction of Cr(VI) ion. The preparation has been carried out by exchanging of Ti(IV) ion from Titanium isopropoksida Ethanol-water solution plus 1 gram cation exchange resin, followed by calcination at 200oC. Characterization was conducted using X-ray diffraction (XRD) method. The photoreduction was proceeded with batch system, and the influence of radiation time, photocatalyst mass and Cr(VI) ion concentration were studied. The research results show that preparation of TiO2-resin increase the activity of photocatalyst in the reduction reaction of Cr(VI) ion. Radiation time affect significantly the product of photoreduction of Cr(VI) ion catalyzed by TiO2-resin. Increasing of exposure time up to 24 hours can increase the effectiveness of Cr(VI) ion photoreduction, however for longer exposure time than 24 hours, the effectiveness of Cr(VI) photoreduction tend to decrease. Increasing TiO2- resin mass to 50 mg, improve Cr(VI) ion photoreduction, while the addition of photocatalyst mass greater than 50 mg has no significant effect on Cr(VI) photoreduction. At low concentration of Cr(VI), photoreduction can proceed completely but increasing concentration of Cr(VI) give rise to a lower photoreduction result.

Kata Kunci : Pengembanan, fotokatalis TiO2-resin, fotoreduksi, ion Cr(VI).


    Tidak tersedia file untuk ditampilkan ke publik.