Laporkan Masalah

PENGARUH AKTIVASI ASAM DAN PROSES HIDROTERMAL TERHADAP PENINGKATAN HIDROFOBISITAS LEMPUNG ALAM

PRIYAGUNG DHEMI W, Dr. Yateman Arryanto

2013 | Skripsi | KIMIA

Dalam penelitian ini, peningkatan hidrofobisitas lempung alam telah dilakukan dengan dua teknik yang berurutan yaitu teknik aktivasi asam dan teknik hidrotermal. Teknik aktivasi asam dilakukan dengan merefluks lempung alam dengan larutan HCl pada temperatur 90oC selama 6 jam. Konsentrasi HCl yang digunakan bervariasi yaitu 2, 4, dan 6 M. Teknik hidrotermal dilakukan dengan memanaskan campuran lempung teraktivasi asam, larutan NaOH, etanol, dan TPA Br dalam autoklaf pada temperatur 170oC selama 24 jam dengan variasi waktu pemeraman sebelum hidrotermal adalah 24, 72, dan 168 jam. Setelah proses hidrotermal, material dikalsinasi pada 600oC guna menghilangkan cetakan organik. Material yang diperoleh pada setiap tahapan dianalisis perubahan massa dan adsorpsi airnya kemudian dikarakterisasi dengan spektrometer inframerah untuk mengidentifikasi gugus fungsi yang ada dan difraktometer sinar-X untuk mengidentifikasi kristalinitas mineral. Proses aktivasi asam dapat menaikkan hidrofobisitas material lempung dengan hasil paling tinggi diperoleh pada aktivasi dengan HCl 6 M. Adsorpsi air berkurang dari 0,13 menjadi 0,06 g/g material. Perlakuan hidrotermal juga menaikkan hidrofobisitas material dengan hasil yang paling tinggi diperoleh dengan pemeraman selama 24 jam. Adsorpsi air berkurang dari 0,076 menjadi 0,03 g/g material.

In this research, the enhancement in hydrophobicity of natural clay has been done with two sequential techniques that were acid activation technique and hydrothermal technique. Acid activation was done by refluxing natural clay with HCl solution at 90oC for 6 hours. The concentrations of HCl used were varied at 2, 4, and 6 M. Hydrothermal technique was done by heating the mixture containing acid-activated clay, NaOH solution, ethanol, and TPA Br in an autoclave at 170oC for 24 hours with the variations of aging time at 24, 72, and 168 h. After hydrothermal process, the materials were calcined at 600oC to remove the organic template. Materials obtained in every technique were analyzed for the mass change and the water adsorption then characterized with infrared spectrometer to identify the functional group and X-ray difractometer to identify the crystallinity of minerals. Acid activation technique was able to enhance the hydrophobicity of natural clay and the highest result is obtained from the activation with HCl 6M. The water adsorption decreased from 0,13 to 0,06 g/g materials. Hydrothermal treatment also enhanced hydrophobicity of the clay with the highest result was obtanined by aging for 24 hours. The water adsorption was decreased from 0,076 to 0,03 g/g material.

Kata Kunci : lempung alam, hidrofobisitas, aktivasi asam, hidrotermal


    Tidak tersedia file untuk ditampilkan ke publik.