Perbedaan Kekuatan Geser Pelekatan Antara Resin Komposit Self Adhesive Flowable Dan Resin Komposit Dengan Bonding Self Etch pada Email Dan Dentin
Anung Sri Gutomo, drg. Pribadi Santosa, M.S., Sp. KG,
2012 | Tesis | S2 Ilmu Konservasi GigiPenelitian ini dilakukan dengan tujuan untuk mengetahui perbedaan kekuatan geser pelekatan antara resin komposit self adhesive flowable dan resin komposit flowable dengan bonding self etch pada email dan dentin. Subjek yang digunakan dalam penelitian ini adalah sebanyak 20 subjek. Setelah gigi dipreparasi dan fiksasi dengan menggunakan resin akrilik self cure, subjek dibagi dalam 4 kelompok, masing-masing kelompok terdiri atas 5 subjek. Kelompok I subjek diaplikasi resin komposit self adhesive flowable pada email, sedangkan pada kelompok II aplikasi self adhesive flowable dilakukan pada dentin. Kelompok III subjek diaplikasi resin komposit flowable dengan bonding self etch pada email, sedangkan pada kelompok IV subjek diaplikasikan bahan yang sama namun aplikasi dilakukan pada dentin. Tahap selanjutnya subjek direndam dalam saliva buatan pH 6,8, disimpan dalam inkubator suhu 37°C selama 24 jam, dilakukan thermocycling pada suhu 4°C dan 55°C selama 1 menit, kemudian dikeringkan dan diuji kekuatan geser pelekatan dengan menggunakan universal testing mechine. Data yang diperoleh dianalisis dengan menggunakan anava dua jalur. Hasil pengujian dengan anava dua jalur menunjukkan tidak terdapat perbedaan kekuatan geser pelekatan antara resin komposit self adhesive flowable dan resin komposit flowable dengan bonding self etch baik pada email maupun dentin (p>0,05). Kesimpulan penelitian ini adalah tidak terdapat perbedaan kekuatan geser pelekatan antara resin komposit self adhesive flowable dan resin komposit flowable dengan bonding self etch, tidak terdapat terdapat kekuatan geser pelekatan pada email dan dentin dan tidak ada interaksi antara jenis resin komposit flowable dengan email dan dentin.
The purpose of the study was to investigate the shear bond strength differences of self adhesive flowable and flowable resin composite with one step of self etch bonding either at enamel and dentin. Twenty caries free maxillary premolar teeth were prepared and fixed using self cure acrylic resin. All teeth were randomly assigned in four groups,each group consisted of five subjects. First group was applied with self adhesive flowable resin composite on enamel, while in second group was applied with self adhesive flowable resin composite on dentin.Third group was applied flowable resin composite with one step of self etch on enamel, while in fourth group was applied flowable resin composite with one step of self etch on dentin. Following immersion in artificial saliva for 24 hours at a temperature of 37°C, the teeth were thermocycled (4°C and 55°C each of 1 minute), then dried and tested using universal testing mechine. Data obtained were analyzed using two ways ANOVA. The statistical analysis using two ways ANOVA revealed that no different shear bond strength of resin composite using self adhesive flowable and flowable resin composite with one step self etch both on enamel and dentin (p>0,05). It can be concluded that there is no difference shear bond strength of resin composite using self adhesive flowable and flowable resin composite with one step self etch bond, there is no difference shear bond strength on the enamel and dentin and no interaction between type of flowable resin composite both enamel and dentin.
Kata Kunci : kekuatan geser pelekatan – resin komposit self adhesive flowable – resin komposit flowable dengan bonding self etch – email - dentin