Pemanfaatan minyak goreng bekas sebagai bahan bakar alternatif pada Burner termodifikasi
SETYANI, Dwi Agung Arif, Dr.Ir. Bardi Murachman, SU.,DEA
2006 | Tesis | S2 Teknik KimiaMinyak goreng bekas sebagai limbah rumah tangga dan industri rumah makan merupakan bahan yang potensial sebagai bahan bakar alternatif pengganti minyak bakar di burner termodifikasi. Burner termodifikasi ini memiliki ruang stabilisasi sebagai tempat pemanasan awal dan berfungsi untuk menguapkan sebagian minyak goreng bekas dengan panas dari reaksi pembakaran. Penelitian dilakukan dengan memvariasikan rasio udara primer dengan minyak goreng bekas (fuel) atau Air Fuel Ratio Udara Primer, mol/mol (AFRpn) yang dilakukan dengan dua cara yaitu mengalirkan udara dengan laju alir tertentu pada laju alir minyak tetap dan mengalirkan minyak dengan laju alir tertentu pada laju alir udara tetap. Proses dilakukan dengan memanaskan minyak goreng sampai suhu 60°C untuk menurunkan kekentalannya, menempatkannya dalam tangki bertekanan 0,3 mPa agar minyak dapat mengalir menuju burner termodifikasi bersamaan dengan pengaliran udara primer dari kompresor bertekanan 5 atm yang berfungsi sebagai atomizer dan kemudian keluar secara bersamaan dari nozle burner , bercampur dengan udara sekunder sehingga kemudian terjadi terjadi reaksi pembakaran minyak oleh udara primer dari kompresor dan udara sekunder dari atmosfer lingkungan. Suhu pembakaran optimum 1119°C pada AFRpn sekitar 40 mol/mol pada laju alir minyak (FMJ) sekitar 13 mL/menit dan laju alir udara primer(FUP) sekitar 5854 mL/menit. Konversi optimum sebesar 97% pada AFRpn sekitar 15 mol/mol pada FMJ sekitar 13 mL/menit dan FUP sekitr 2222 mL/menit. Konversi CO2 terbesar yang pernah dicapai 97,5 % pada AFRpn sekitar 15 and FMJ sekitar 13 mL/menit. dan FUP sekitar 2222 mL/menit. Konversi CO terendah yang dapat dicapai sebesar 10% pada AFRpn sekitar 15 , FMJ sekitar 13 mL/menit. Dan FUP sekitar 2222 mL/menit. Pembakaran minyak goreng bekas ini tidak menghasilkan emisi gas NOx, hal ini membuktikan bahwa minyak goreng bekas adalah bahan bakar yang ramah lingkungan, tapi emisi gas COnya masih tinggi sekitar 100ppm pada Temperatur Ujung Burner (Tub) sebesar 561°C.
The Frying oil as waste from the restaurant industry and domestic activities has the potential as material for Alternative fuel replacing the kerosene or the bunker oil in the modified burner. The experiment is carried out by heating up the fuel temperature to 60°C for reducing frying oil waste’s viscosity, and then following by combustion process after mixing it with the primary air from the compressor equipment as oil atomizer and the secondary air from the atmosphere. The process is carried out by heating the frying oil waste up to 60°C and then flowing it into the 0.3 mega Pa vessel, so that the frying oil waste can flow and mixed with the primary air from the compressor and then the frying oil waste combustion reaction occurred in, mixed with the primary air from the compressor and the secondary air from the atmosphere. The research is carried out by changing the Ratio of the primary air to fuels (AFRpn) The experiment result show that the optimum flame combustion temperature is 1119°C on the AFRpn of 40.365 mol/mol on the used of frying oil velocity (FMJ) of 12.93 mL/minute and primary airs velocity (FUP) of 12.93 mL/minute. The optimum conversion of the frying oil waste to CO2 and CO is 97.7 % with the AFRpn of 15mol/mol with the frying oil velocity of 13 mL/minute, and the primary airs velocity of 2222 mL/minute. The lowest CO conversion that can be reached is about 0.01 at the AFRpn of 15 mol/mol and the frying oil velocity of 13 mL/minute and primary airs velocity of 2222 mL/ minute. This frying oil waste combustion produced zero NOx emission gas. This experimental result has proved that the frying oil waste is a friendly fuel for environment, but the CO emission gas was still high, around 100ppm. That’s why this process still needs improvement to minimize the CO emission gas.
Kata Kunci : Bahan Bakar Alternatif,Minyak Goreng Bekas,Burner Termodifikasi, frying oil waste, combustion, CO2, CO primary air fuel ratio (AFRpn)