Laporkan Masalah

Analisis Variasi Windowing Untuk Pemetaan Potensi Hidrokarbon Menggunakan Metode Low Frequency Passive Seismic pada Lapangan "Y", Cekungan Sumatera Selatan

Revin Yulistyo Nur Hutomo, Dr.rer.nat. Wiwit Suryanto, S.Si., M.Si.

2026 | Skripsi | GEOFISIKA

Cekungan Sumatera Selatan memiliki potensi hidrokarbon yang besar, tetapi sebagian besar berada pada zona dalam dan struktur geologi yang kompleks sehingga diperlukan metode yang lebih efektif untuk identifikasinya. Metode Low Frequency Passive Seismic (LFPS) dimanfaatkan untuk mengidentifikasi keberadaan hidrokarbon melalui anomali spektrum frekuensi rendah pada seismic background noise. Penelitian ini bertujuan mengidentifikasi pengaruh variasi windowing terhadap atribut amplitudo, energi, dan frekuensi spektrum, mengetahui pengaruhnya terhadap potensi hidrokarbon, serta mengetahui indikasi cadangan hidrokarbon pada Lapangan “Y”, cekungan Sumatera Selatan. Data yang digunakan berupa rekaman mikrotremor dari 55 titik akuisisi yang direkam menggunakan borehole seismometer tiga komponen. Data diolah melalui tahap pra-pengolahan, windowing dengan variasi 10, 20, 30, 60, dan 90 detik, analisis polarisasi, dan transformasi Fourier untuk memperoleh atribut spektrum, dilanjutkan koreksi temporal dan spasial, serta pembobotan menjadi peta atribut terintegrasi yang diinterpretasikan dengan data depth structure. Hasil penelitian menunjukkan windowing pendek menghasilkan nilai amplitudo dan energi yang lebih tinggi namun fluktuatif, sedangkan windowing panjang menghasilkan spektrum lebih halus dengan nilai atribut yang menurun, sementara atribut frekuensi relatif tidak terpengaruh. Variasi windowing tidak mengubah pola utama persebaran potensi hidrokarbon, tetapi memengaruhi luas area dan kejelasan anomali dengan windowing 90 detik memberikan hasil paling representatif. Zona prospek hidrokarbon teridetifikasi pada tiga titik akuisisi yang berhubungan dengan struktur antiklin pada kedalaman sekitar 1470-1500 m.

The South Sumatera Basin, particularly the Jambi Sub-basin, holds substantial hydrocarbon potential, yet much of it lies within deep zones and complex structures, requiring a more effective identification method. The Low Frequency Passive Seismic (LFPS) method is used to detect the presence of hydrocarbons through low-frequency spectral anomalies in seismic background noise. This study aims to identify the effect of windowing variation on the amplitude, energy, and frequency spectral attributes, to determine its influence on hydrocarbon potential, and to identify indications of hydrocarbon reserves in the "Y" Field, South Sumatera Basin. The data used consist of microtremor recordings from 55 acquisition points, three of which are well points, recorded using three-component borehole seismometers. The data were processed through pre-processing, windowing with variations of 10, 20, 30, 60, and 90 seconds, polarization analysis, and Fourier transformation to obtain the spectral attributes, followed by temporal and spatial correction, thresholding, and weighting to produce an integrated attribute map interpreted together with depth structure data. The results show that shorter windowing produces higher but more fluctuating amplitude and energy values, whereas longer windowing produces smoother spectra with decreasing attribute values, while the frequency attribute remains relatively unaffected. Windowing variation does not change the main distribution pattern of hydrocarbon potential but affects the extent and clarity of the identified anomalies, with the 90 second windowing providing the most representative result. The hydrocarbon prospect zone is identified at three acquisition points associated with an anticline structure at a depth of approximately 1470–1500 m.

Kata Kunci : Low Frequency Passive Seismic, windowing, hidrokarbon

  1. S1-2026-481643-abstract.pdf  
  2. S1-2026-481643-bibliography.pdf  
  3. S1-2026-481643-tableofcontent.pdf  
  4. S1-2026-481643-title.pdf