DESAIN DAN IMPLEMENTASI PEMBANGKIT LISTRIK TENAGA MIKROHIDRO BERBASIS AIR BLOWDOWN MENARA PENDINGIN DI PLTU ASAM ASAM
HANDA RAMADHAN, Dr. Rachmawan Budiarto, S.T., M.T ; Dr.Ing. Ir. Kusnanto
2026 | Tesis | MAGISTER TEKNIK FISIKA
Pembangkit Listrik Tenaga Uap (PLTU) Asam Asam dengan sistem pendingin resirkulasi menghasilkan air blowdown dari menara pendingin yang umumnya langsung dialirkan ke saluran pembuangan. Padahal, aliran tersebut memiliki potensi energi hidrolik yang dapat dimanfaatkan sebagai sumber energi listrik skala mikro. Penelitian ini bertujuan untuk merancang dan menganalisis kelayakan teknis, lingkungan, dan finansial Pembangkit Listrik Tenaga Mikrohidro (PLTMH) berbasis air blowdown menara pendingin di PLTU Asam Asam.
Metode penelitian meliputi survei lapangan, pengukuran debit dan head, analisis kurva durasi debit, perancangan hidrolik penstock, pemilihan turbin dan generator, perhitungan produksi energi tahunan, estimasi penurunan emisi CO?, serta analisis finansial menggunakan NPV, IRR, Payback Period, dan LCOE.
Hasil penelitian menunjukkan bahwa menara pendingin Unit 1 dan 2 merupakan lokasi paling layak karena memiliki aliran berbasis gravitasi, debit andalan Q40 sebesar 0,15 m³/s, dan head sebesar 4 m. Diameter penstock optimal diperoleh sebesar 350 mm, dengan daya keluaran 3,23 kW pada mode operasi penuh dan 1,73 kW pada mode operasi parsial. Sistem dirancang menggunakan turbin propeller/Kaplan dan generator asinkron sekitar 4 kW. Dengan mempertimbangkan jadwal overhaul Unit 1 dan 2, PLTMH diproyeksikan menghasilkan energi listrik sebesar 25.378,80–25.996,32 kWh/tahun, atau mampu memasok sekitar 85,42% kebutuhan energi tahunan Masjid PLTU Asam Asam pada tahun 2026. Pemanfaatan PLTMH juga berpotensi menurunkan emisi karbon sebesar 31,80–32,57 ton CO?/tahun, dengan penurunan kumulatif 289,06 ton CO? selama periode 2026–2034. Secara finansial, proyek dinyatakan layak dengan NPV Rp 59.150.464,01, IRR 12,59%, Payback Period 7 tahun 1 bulan, dan LCOE Rp1.496,08/kWh.
Asam Asam coal-fired power plants with recirculating cooling systems generate blowdown water from cooling towers, which is generally discharged directly into drainage channels without further utilization. However, this flow has hydraulic energy potential that can be utilized as a micro-scale electricity source. This study aims to design and analyze the technical, environmental, and financial feasibility of a Micro-Hydropower Plant (MHP) utilizing cooling tower blowdown water at Asam Asam Power Plant.
The research methods include field surveys, flow rate and head measurements, flow duration curve analysis, hydraulic penstock design, turbine and generator selection, annual energy production calculation, CO? emission reduction estimation, and financial analysis using Net Present Value (NPV), Internal Rate of Return (IRR), Payback Period, and Levelized Cost of Electricity (LCOE).
The results show that the cooling towers of Units 1 and 2 are the most feasible locations because they have gravity-based flow, a reliable Q40 discharge of 0.15 m³/s, and a head of 4 m. The optimal penstock diameter is 350 mm, producing an output power of 3.23 kW in full-load operation and 1.73 kW in partial-load operation. The system is designed using a propeller/Kaplan turbine and an approximately 4 kW asynchronous generator. By considering the overhaul schedule of Units 1 and 2, the MHP is projected to generate 25,378.80–25,996.32 kWh/year, supplying approximately 85.42% of the annual electricity demand of the mosque at Asam Asam Power Plant in 2026. The MHP utilization also has the potential to reduce carbon emissions by 31.80–32.57 tons CO?/year, with a cumulative reduction of 289.06 tons CO? during 2026–2034. Financially, the project is feasible, with an NPV of IDR 59,150,464.01, an IRR of 12.59%, a Payback Period of 7 years and 1 month, and an LCOE of IDR 1,496.08/kWh.
Kata Kunci : air blowdown, menara pendingin, PLTMH, energy recovery, emisi CO?, kelayakan finansial.