STUDI EKSPERIMENTAL PENGGELONTORAN SEDIMEN WADUK MELALUI BOTTOM OUTLET
Agatha Padma Laksitaningtyas, Dr. Ir. Istiarto, M.Eng., IPU.
2026 | Disertasi | S3 Teknik Sipil
Sedimentasi merupakan permasalahan utama yang
memengaruhi keberlanjutan fungsi waduk, terutama akibat berkurangnya kapasitas
tampungan dan menurunnya umur layanan. Akumulasi sedimen menghasilkan
pendangkalan dan penurunan umur guna waduk. Penggelontoran sedimen melalui bottom
outlet merupakan salah satu metode evakuasi sedimen yang dapat diterapkan. Bottom
outlet merupakan bangunan air yang dapat mengalirkan air dan sedimen keluar
dari tampungan waduk menuju hilir. Proses penggelontoran sedimen akan menciptakan
kondisi hidraulik di bagian endapan sedimen membentuk scour cone di
dekat bottom outlet dan mengangkut sedimen keluar waduk.
Penelitian dilakukan menggunakan model eksperimen di
Laboratorium Hidraulika Departemen Teknik Sipil dan Lingkungan Fakultas Teknik
Universitas Gadjah Mada dengan variasi diameter bottom outlet, kedalaman
air dan ketinggian sedimen. Diameter bottom outlet yang digunakan adalah
1.3 cm, 1.9 cm, dan 2.5 cm. Kedalaman air di atas bak 2 sedalam 50 cm, 60 cm,
dan 70 cm. Pengukuran pola aliran dilakukan menggunakan metode Particle Image Velocimetry (PIV), sedangkan Asesmen penggelontoran sedimen
dilakukan melalui pengamatan pembentukan scour cone.
Hasil penelitian menunjukkan bahwa aliran terfokus
menuju bottom outlet dan menghasilkan zona kecepatan tinggi yang
berpotensi menggelontorkan sedimen. Scour cone terbentuk cepat diantara
menit-menit awal setelah bottom outlet dibuka dan mencapai kondisi
stabil di menit ke-10. Scour cone yang terbentuk menunjukkan geometri
semi-ellipsoidal hingga hemisferis. Diameter bottom outlet berpengaruh
signifikan terhadap penyebaran horizontal dan kedalaman gerusan, diameter yang
lebih kecil menghasilkan gerusan lebih dalam namun sempit, sedangkan diameter yang
lebih besar menghasilkan gerusan lebih lebar namun dangkal. Analisis dimensi
dan regresi nonlinier multivariabel digunakan untuk mengembangkan persamaan tak
berdimensi untuk memprediksi panjang, lebar, kedalaman, dan volume scour
cone. Model regresi untuk memprediksi scour
cone yang dihasilkan
menunjukkan tingkat akurasi yang tinggi.
Sedimentation is a major problem affecting
the sustainability of reservoir functions, particularly because it reduces
storage capacity and shortens reservoir service life. Sediment accumulation
causes reservoir shallowing and decreases its useful life. Sediment flushing
through a bottom outlet is one method that can be applied to evacuate deposited
sediment. A bottom outlet is a hydraulic structure designed to discharge water
and sediment from a reservoir to the downstream reach. The flushing process generates
hydraulic conditions within the sediment deposit that promote the formation of
a scour cone near the bottom outlet and facilitate sediment evacuation from the
reservoir.
This study was conducted using an
experimental model at the Hydraulics Laboratory, Department of Civil and
Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada. The
experimental variables included bottom-outlet diameter, water depth, and
sediment thickness. The bottom-outlet diameters were 1.3, 1.9, and 2.5 cm,
while the water depths in the experimental reservoir were 50, 60, and 70 cm.
Flow patterns were measured using Particle Image Velocimetry (PIV), whereas
sediment-flushing performance was assessed by observing scour-cone formation.
The results showed that the flow was
concentrated toward the bottom outlet, generating a high-velocity zone capable
of mobilizing and flushing sediment. The scour cone formed rapidly during the
first few minutes after the bottom outlet was opened and reached a stable
condition within 10 minutes. Its geometry ranged from semi-ellipsoidal to
hemispherical. The bottom-outlet diameter significantly affected the horizontal
extent and depth of scour. Smaller outlet diameters produced deeper but
narrower scour cones, whereas larger outlet diameters produced wider but
shallower scour cones. Dimensional analysis and multivariable nonlinear
regression were employed to develop dimensionless equations for predicting the
length, width, depth, and volume of the scour cone. The resulting regression
models demonstrated a high level of predictive accuracy.
Kata Kunci : sedimen, waduk, penggelontoran, bottom outlet, scour cone