Laporkan Masalah

Penambahan Circular Hollow Steel Damper dengan Sirip dan Celah pada Struktur Jembatan dengan Peletakan Rubber Bearing

TOBOK SIHOL MARITO ARITONANG, Prof. Ir. Iman Satyarno, M.E., Ph.D., IPU.; Prof. Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU. ACPE.

2026 | Disertasi | S3 Teknik Sipil

Jembatan terdiri atas struktur atas, struktur bawah, dan sistem peletakan (bearing). Salah satu peletakan yang umum digunakan adalah elastomeric rubber bearing (ERB), yang berfungsi menahan beban serta berperan sebagai sistem isolasi seismik. Berbagai sistem kontrol pasif telah dikembangkan untuk meningkatkan ketahanan seismik dari struktur jembatan, dan salah satu di antaranya adalah circular hollow steel damper (CHSD). Kinerja CHSD dapat ditingkatkan melalui penambahan pelat sirip untuk mencegah tekuk lokal. Pada aplikasi jembatan, beban lalu lintas berulang dan aksi siklik berfrekuensi rendah dapat mempercepat disipasi energi serta menimbulkan kerusakan akibat kelelahan jangka panjang. Untuk itu, beberapa penelitian mengusulkan penggunaan mekanisme celah pada peredam untuk mengatasi masalah kelelahan. Namun, hingga saat ini, belum ada penelitian yang mengkaji kinerja struktural CHSD yang mengombinasikan perkuatan sirip dan pemasangan celah secara bersamaan. Oleh karena itu, penelitian ini mengembangkan perangkat CHSD dengan sirip dan celah (CHSD-F-G) dan menerapkannya pada jembatan hollow slab on pile (HSOP) dengan peletakan ERB untuk meningkatkan kinerja seismik dari sistem isolasi pada struktur jembatan HSOP tersebut.
Penelitian ini terdiri atas dua tahap pengujian. Pengujian tahap 1 bertujuan untuk mengkaji perilaku mekanik dan kinerja seismik perangkat CHSD melalui pengujian eksperimental dengan pembebanan geser siklik dan analisis numerik nonlinier menggunakan metode elemen hingga. Pada tahap ini, benda uji CHSD terdiri dari CHSD tanpa sirip (CHSD-NF), CHSD dengan sirip (CHSD-F), dan CHSD dengan sirip dan celah (CHSD-F-G). Pengujian tahap 2 bertujuan untuk mengkaji perilaku mekanik dan kinerja seismik ERB dan CHSD-F-G yang dipasang pada model struktur pile group sebagai representasi struktur jembatan HSOP, termasuk interaksi keduanya saat bekerja secara bersamaan. Untuk itu, dirancang model pile group beserta benda uji ERB dan CHSD-F-G, kemudian dilakukan pengujian geser siklik untuk mengkaji perilaku mekanik dan kinerja seismik ERB dan CHSD-F-G, serta interaksi keduanya saat bekerja bersama-sama. 
Hasil pengujian tahap 1 menunjukkan bahwa penambahan pelat sirip pada CHSD efektif meningkatkan kekuatan geser, kekakuan, perpindahan leleh, dan kapasitas disipasi energi. Lebih lanjut, rasio redaman viskos ekuivalen dari benda uji CHSD-NF dan CHSD-F berada pada rentang  49.66?54.42%. Sementara pada benda uji CHSD-F-G, rasio redaman viskos ekuivalen berkisar antara 38.8% hingga 52%. Secara keseluruhan, penambahan sirip dan celah pada CHSD berpotensi diterapkan pada struktur jembatan HSOP karena mampu memberikan rasio redaman yang tinggi sekaligus menunda resistensi gaya geser sehingga lebih tahan terhadap beban layan. Hasil pengujian tahap 2 menunjukkan bahwa pemasangan CHSD-F-G dengan ERB pada pile group secara signifikan meningkatkan kinerja dari sistem isolasi dibandingkan dengan penggunaan ERB saja, ditandai oleh peningkatan kekuatan geser maksimum sebesar 32.03–39.93%, penurunan perpindahan maksimum sebesar 20.86–35.97%, peningkatan kapasitas disipasi energi kumulatif sebesar 84.69%, dan rasio redaman viskos ekuivalen sebesar 264.81%. Selain itu, meskipun CHSD-F-G-P tidak memiliki kemampuan recentering secara mandiri, kombinasi dengan ERB-P memungkinkan sistem isolasi dengan tambahan peredam untuk kembali ke posisi awal setelah pembebanan, sehingga efektif dalam mengurangi potensi deformasi permanen pascagempa. 

A bridge consists of a superstructure, substructure, and bearing system. One of the most commonly used bearing types is the elastomeric rubber bearing (ERB), which functions to support structural loads and serves as a seismic isolation system. Various passive control systems have been developed to enhance the seismic performance of bridge structures, one of which is the circular hollow steel damper (CHSD). The performance of CHSD can be improved by incorporating fin plates to prevent local buckling. In bridge applications, repeated traffic loads and low-frequency cyclic actions may accelerate energy dissipation and lead to long-term fatigue damage. To address this issue, several studies have proposed the use of a gap mechanism in dampers to mitigate fatigue effects. However, to date, no study has investigated the structural performance of a CHSD that simultaneously incorporates both fin reinforcement and a gap mechanism. Therefore, this study develops a circular hollow steel damper with fin and gap (CHSD-F-G) and applies it to a hollow slab on pile (HSOP) bridge equipped with ERB bearings to enhance the seismic performance of the bridge isolation system.
This study consists of two stages. Stage 1 aims to investigate the mechanical behavior and seismic performance of CHSD devices through experimental cyclic shear loading tests and nonlinear numerical analysis using the finite element method. In this stage, three types of CHSD specimens were investigated: CHSD without fins (CHSD-NF), CHSD with fins (CHSD-F), and CHSD with fins and gaps (CHSD-F-G). Stage 2 aims to investigate the mechanical behavior and seismic performance of ERB and CHSD-F-G installed on a pile group structural model representing an HSOP bridge structure, including their interaction when operating simultaneously. To achieve this objective, a laboratory-scale pile group model was designed together with ERB and CHSD-F-G specimens. Cyclic shear loading tests were then conducted to evaluate the mechanical behavior and seismic performance of the ERB and CHSD-F-G, as well as their combined interaction within the isolation system.
The results of Stage 1 indicate that the addition of fin plates to the CHSD effectively enhances shear strength, stiffness, yield displacement, and energy dissipation capacity. Moreover, the equivalent viscous damping ratio of the CHSD-NF and CHSD-F specimens ranged from 49.66% to 54.42%. Meanwhile, the equivalent viscous damping ratio of the CHSD-F-G specimen varied from 38.8% to 52%. Overall, the incorporation of fins and a gap mechanism in the CHSD shows strong potential for application in HSOP bridge structures, as it provides high damping capacity while delaying shear force resistance, thereby improving performance under service loads. The results of Stage 2 indicate that installing CHSD-F-G in parallel with ERB in the pile group significantly enhances the performance of the isolation system compared to using ERB alone. This improvement is evidenced by increases in maximum shear strength of 32.03–39.93%, reductions in maximum displacement of 20.86–35.97%, increases in cumulative energy dissipation capacity of 84.69%, and equivalent viscous damping ratio improvements of 264.81%. Furthermore, although the CHSD-F-G-P does not possess inherent recentering capability, its combination with ERB-P enables the isolation system with supplemental damping to return to its original position after loading, thereby effectively reducing the potential for post-earthquake residual deformation.

Kata Kunci : Circular hollow steel damper, fins, gaps, elastomeric rubber bearing, seismic isolation system, equivalent viscous damping ratio.

  1. S3-2026-468324-abstract.pdf  
  2. S3-2026-468324-bibliography.pdf  
  3. S3-2026-468324-tableofcontent.pdf  
  4. S3-2026-468324-title.pdf