Laporkan Masalah

Rancang Bangun Sistem Inventarisasi Peralatan Outdoor Berbasis QR Code Scanner GM67 dengan Integrasi Mikrokontroler ESP32-CAM dan Basis Data Digital untuk UKM Mapagama

Syella April Liyanti, Dr. Trias Prima Satya, S.Si., M.Sc.

2026 | Tugas Akhir | D4 Teknologi Rekayasa Instrumentasi dan Kontrol

Pengelolaan inventaris aset dalam jumlah besar berupa aset portabel masih umum dilakukan secara manual, sehingga rentan terhadap inefisiensi waktu dan kesalahan pencatatan. Penelitian ini bertujuan merancang, membangun, dan menguji kinerja sistem inventarisasi aset berbasis QR Code scanner yang terintegrasi dengan mikrokontroler dan basis data digital. Sistem dirancang menggunakan QR Code scanner GM67 yang berkomunikasi dengan mikrokontroler ESP32-CAM melalui antarmuka UART, terintegrasi dengan basis data digital cloud melalui jaringan WiFi secara real-time. Pengujian dilakukan terhadap 35 aset representatif, meliputi pengujian fitur pengambilan foto, akurasi pemindaian terhadap variasi jarak, kecepatan pemindaian, serta perbandingan kinerja dengan metode pencatatan manual, yang dianalisis secara deskriptif menggunakan parameter success rate, efisiensi waktu, dan tingkat akurasi. Hasil pengujian menunjukkan tingkat keberhasilan fitur pengambilan foto sebesar 100%, rentang jarak pemindaian efektif 7–31 cm, serta rerata waktu pencatatan otomatis 10,73 detik per aset, jauh lebih cepat dibandingkan metode manual sebesar 61,25 detik per aset, atau setara efisiensi waktu 82,48%, dengan tingkat akurasi pemindaian 100% tanpa kesalahan pencatatan. Temuan ini memperkuat bukti empiris bahwa otomatisasi identifikasi berbasis QR Code secara konsisten meningkatkan efisiensi dan akurasi proses inventarisasi dibandingkan metode manual.

Inventory management of a large number of portable field equipment assets is still commonly conducted manually, making the process prone to time inefficiency and recording errors. This study designs, builds, and evaluates the performance of a QR Code scanner-based inventory system integrated with a microcontroller and a digital database. The system uses a GM67 QR Code scanner communicating with an ESP32-CAM microcontroller via a UART interface, integrated with a cloud-based database through a real-time WiFi connection. Testing was conducted on 35 representative assets, covering the photo-capture feature, scanning accuracy across varying distances, scanning speed, and a performance comparison with the manual method, analyzed descriptively and quantitatively using success-rate, time-efficiency, and accuracy parameters. The results show a 100% success rate for the photo-capture feature, an effective scanning distance range of 7–31 cm, and an average automatic recording time of 10.73 seconds per asset, considerably faster than the 61.25 seconds required manually, corresponding to a time efficiency of 82.48%, with a scanning accuracy of 100% and no recording errors. These findings provide empirical evidence that QR Code-based identification automation consistently improves the efficiency and accuracy of the inventory process compared with the conventional manual method.

Kata Kunci : Inventarisasi Aset, QR Code, ESP32-CAM, Mikrokontroler, Internet of Things

  1. D4-2026-493452-abstract.pdf  
  2. D4-2026-493452-bibliography.pdf  
  3. D4-2026-493452-tableofcontent.pdf  
  4. D4-2026-493452-title.pdf