Rancang Bangun Sistem Pendingin Aktif Flexible Solar Panel untuk Aplikasi Vehicle-Integrated Photovoltaic (VIPV)
Muhamad 'Ars Gagah Prakoso, Dr. Eng. Tika Erna Putri, S.Si., M.Sc.
2026 | Tugas Akhir | D4 TEKNOLOGI REKAYASA ELEKTRO
Pemanfaatan panel surya fleksibel pada aplikasi Vehicle-Integrated Photovoltaic (VIPV) menghadapi tantangan berupa penurunan efisiensi kelistrikan akibat kenaikan suhu operasional, mengingat posisi panel yang menempel langsung pada bodi kendaraan tanpa ruang sirkulasi udara yang memadai. Penelitian ini merancang dan membangun sistem pendingin aktif berbasis mikrokontroler ESP32 dengan metode pengkabutan adaptif, memanfaatkan air kondensasi Air Conditioner sebagai fluida pendingin, dan algoritma kendali hibrida kontrol dua posisi berbatas histeresis yang dipadukan dengan PID untuk mengatur debit dan waktu penyemprotan secara otomatis berdasarkan suhu permukaan panel. Pengujian dilaksanakan menggunakan dua node pengukuran berpasangan, yaitu node aktif dan node kontrol, pada tiga variasi material penghantar panas, yaitu tanpa alas, alumunium tipis, dan plastik fiber. Verifikasi algoritma kendali menunjukkan tingkat kesesuaian antara PWM aktual dan simulasi rekonstruksi algoritma dengan koefisien korelasi 0,9727 hingga 0,9992, menunjukkan bahwa perangkat keras menjalankan algoritma sesuai rumusan matematis yang ditetapkan. Hasil pengujian menunjukkan sistem berhasil menurunkan suhu panel sebesar 12,47% hingga 23,29?n meningkatkan daya keluaran bersih sebesar 7,13% hingga 9,62% tergantung variasi material. Variasi tanpa alas, yaitu kondisi panel hanya menggunakan backsheet bawaan pabrikan, tercatat unggul pada mayoritas parameter, meliputi Coefficient of Performance tertinggi sebesar 1,21, daya maksimum ternormalisasi tertinggi sebesar 20,75 W, dan konsumsi air terendah sebesar 5,0 liter per sesi pengujian, menunjukkan bahwa penambahan material penghantar panas tidak selalu memberikan manfaat performa yang signifikan. Estimasi berdasarkan persamaan Arrhenius menunjukkan suhu panel yang lebih rendah pada node aktif berpotensi memperlambat laju penuaan material panel sebesar 2,13 hingga 5,01 kali dibandingkan tanpa pendinginan. Penelitian ini menunjukkan bahwa sistem pendingin aktif berbasis kendali hibrida efektif meningkatkan performa panel surya fleksibel dengan konsumsi energi dan air yang rendah, menjadikannya solusi potensial untuk manajemen termal aplikasi VIPV di wilayah beriklim tropis.
The utilization of flexible solar panels in Vehicle-Integrated Photovoltaic (VIPV) applications faces a challenge of decreased electrical efficiency due to increased operating temperature, since panels are mounted directly onto the vehicle body without adequate air circulation. This study develops an active cooling system based on an ESP32 microcontroller using an adaptive misting method, using Air Conditioner condensation water as the cooling fluid, and a hybrid control algorithm combining hysteresis-bounded two-position control with PID to automatically regulate water spraying based on panel surface temperature. Testing used two paired measurement nodes, the active node and the control node, across three heat-conducting material variations: no base, thin aluminum, and fiber plastic. Control algorithm verification showed strong agreement between the actual and simulated PWM, with correlation coefficients of 0.9727 to 0.9992, confirming that the hardware executes the algorithm according to the established mathematical formulation. Test results show the system successfully reduced panel temperature by 12.47% to 23.29% and increased net power output by 7.13% to 9.62?pending on the material variation. The no-base variation, using only the panel's default backsheet, recorded the best results in most parameters, including the highest Coefficient of Performance (1.21), highest normalized maximum power (20.75 W), and lowest water consumption (5.0 liters per session), indicating that adding a heat-conducting material does not always yield a significant performance benefit. Arrhenius-based estimation shows the lower active-node temperature can slow the panel material's aging rate by 2.13 to 5.01 times compared to without cooling. This study shows that the hybrid control-based active cooling system effectively improves flexible solar panel performance with low energy and water consumption, making it a potential solution for thermal management in VIPV applications in tropical climates.
Kata Kunci : pendingin aktif, panel surya fleksibel, kendali hibrida, VIPV, material penghantar panas