Pengaruh Kombinasi Divot dan Desain Tepi Clear Aligner terhadap Efisiensi Pergerakan Torque Gigi Kaninus Rahang Atas (Studi Finite Element Analysis)
Gratia Trifena Susanto, Dr. drg. Ananto Ali Alhasyimi, M.DSc., Sp.Ort., Subsp. D.Dkf.T.K ;drg. R.R. Paramita Noviasari, Sp.Ort., Subsp. D.Dkf.T.K
2026 | Tesis-Spesialis | S2 Ortodonsia
Penggunaan clear aligner meningkat pesat dalam beberapa tahun terakhir karena memiliki keunggulan dari aspek estetika, kenyamanan, dan kemudahan perawatan. Akurasi pergerakan torque gigi kaninus dengan clear aligner masih menjadi tantangan dan belum banyak diteliti secara spesifik. Divot merupakan lekukan kecil pada permukaan clear aligner yang berfungsi untuk meningkatkan transmisi gaya ke gigi, sedangkan desain tepi clear aligner turut berperan dalam mendistribusikan gaya ortodonti. Penelitian ini bertujuan untuk menganalisis pengaruh penempatan divot dan desain tepi clear aligner terhadap efisiensi pergerakan torque gigi kaninus rahang atas.
Model tiga dimensi rahang atas dari hasil pemindaian CBCT dikonstruksikan menjadi modelfinite element analysis. Divot dibuat dengan kedalaman 0,5 mm dan diameter 1 mm pada dua posisi, yaitu Gingival third (sisi palatal)–Middle third (sisi labial) (GM) dan Middle third (sisi palatal)–Incisal third (sisi labial) (MI). Desain tepi clear aligner terdiri atas scalloped dan straight extended. Gigi kaninus disimulasikan mengalami palatal root torque sebesar 1° ke arah palatal, kemudian dianalisis nilai distribusi tegangan dalam satuan MPa, displacement tendencies dalam satuan milimeter, dan reaction force dalam satuan Newton.
Hasil penelitian menunjukkan bahwa divot GM dengan desain tepi straight extendedmenghasilkan nilai distribusi tegangan tertinggi, pola displacement tendencies akar-mahkota yang sesuai dengan karakteristik torque yang diharapkan dengan rasio pergerakan akar-mahkota paling seimbang, serta reaction force dalam rentang optimal. Kesimpulan penelitian ini menunjukkan bahwa kombinasi penempatan divot dan desain tepi clear aligner meningkatkan efisiensi pergerakan torque gigi kaninus.
The use of clear aligners has increased rapidly in recent years due to their advantages in aesthetics, comfort, and ease of maintenance. However, the accuracy of canine torque movement with clear aligners remains challenging and has not been specifically investigated. A divots are dimple on the clear aligner surface that is intended to enhance force transmission to the tooth, while the trimline design is also considered to play an important role in orthodontic force distribution. This study was aimed to analyze the effect of different divot placement locations and clear aligner trimline designs on the efficiency of canine torque movement.
A three-dimensional maxillary model obtained from CBCT scanning was reconstructed and developed into a finite element analysis model. Divots with a depth of 0.5 mm and a diameter of 1 mm were placed in two placement configurations : Gingival third on the palatal side–Middle third on the labial side (GM) and Middle third on the palatal side–Incisal third on the labial side (MI). Two clear aligner trimline designs, scalloped and straight extended were evaluated. The canine was simulated 1° of palatal root torque. Stress distribution, displacement tendencies, and reaction force were then analyzed in MPa, millimeters, and Newtons.
The results showed that the GM divot combined with the straight extended trimline design produced the highest stress distribution, a root–crown displacement tendency pattern consistent with the expected characteristics of torque movement with the most balanced root–crown movement ratio and reaction force within the optimal range. It was concluded that the combination of divot location and clear aligner trimline design improved the efficiency of canine torque movement.
Kata Kunci : clear aligner, torque, kaninus, finite element analysis, divot, trimline design