Dynamic Modeling and Analysis of Virtual Synchronous Generator Based Grid Forming Inverter in HIL
Rizal Kurniawan Saputra, Ir. Husni Rois Ali, S.T., M.Eng., Ph.D., DIC., SMIEEE.; Dr.-Ing. Ir. Yohan Fajar Sidik, S.T., M.Eng.
2026 | Skripsi | TEKNIK ELEKTRO
Intensitas emisi CO2 global dari sektor energi listrik
diperkirakan menurun hingga tahun 2027, didorong oleh tingginya penetrasi
energi terbarukan yang megubah pembangkitan dari semula didominasi generator
sinkron menjadi didominasi inverter-based resources (IBR). Transisi ini mengurangi inersia
sistem dan menantang stabilitas dinamis sistem tenaga. Grid-Forming Inverter (GFM) berbasis kendali Virtual Synchronous Generator (VSG) menawarkan solusi dengan kemampuan
membentuk tegangan dan frekuensi secara mandiri serta memberikan dukungan
inersia pada sistem. Penelitian ini mengembangkan model dinamis GFM berbasis
kendali VSG dalam kerangka dq yang mencakup kendali outer loops, kendali inner loops, serta topologi jaringan inverter, dan
mengimplementasikannya pada pengujian Hardware-in-the-Loop (HIL). Model mula-mula dibangun di
MATLAB/Simulink, kemudian dibangun ulang pada PLECS agar sesuai dengan
lingkungan pengujian HIL menggunakan RT Box 2, dengan konfigurasi multi-core (3 CPU) dan discretization step size 9 mikrodetik per core. Performa GFM dianalisis melalui pengujian steady state response dan dynamic response pada kondisi very weak grid dan strong grid. Hasil menunjukkan bahwa GFM berperforma lebih
baik pada kondisi very weak grid dibandingkan strong grid, yang ditandai dengan lebih tingginya arus
transien dan coupling daya aktif-reaktif pada kondisi strong grid. Penerapan virtual impedance loop terbukti efektif membatasi arus transien,
mengurangi coupling daya aktif-reaktif, serta mempertahankan
stabilitas sistem pada kondisi strong grid, yang tanpanya inverter memasuki kondisi tidak
stabil. Pengujian HIL secara real-time menunjukkan bahwa strategi kontrol GFM yang
dikembangkan, dengan penerapan virtual impedance loop, mampu menjaga stabilitas sistem secara keseluruhan
pada kondisi very weak grid maupun strong grid sehingga memberikan dasar praktis bagi
penerapan perangkat keras (hardware deployment) teknologi GFM dalam sistem energi terbarukan di
masa mendatang.
The global CO2 emission intensity from the electric power
sector is projected to decline through 2027, driven by the high penetration of
renewable energy that shifts generation from synchronous generators toward
inverter-based resources (IBR). This transition reduces system inertia and
challenges the dynamic stability of the power system. Grid-Forming Inverter
(GFM) based on Virtual Synchronous Generator(VSG) control offers a solution
through its ability to independently establish voltage and frequency while
providing inertia support to the system. This research develops a dynamic model
of a VSG-based GFM in the dq reference frame, covering the outer loops, inner
loops, and inverter network topology, and implements it in Hardware-in-the-Loop
(HIL) testing. The model is first built in MATLAB/Simulink and then rebuilt in
PLECS to suit the HIL environment on RT Box 2, using a multi-core configuration
(3 CPUs) with a discretization step size of 9 microseconds per core. GFM
performance is analyzed through steady state and dynamic response testing under
very weak grid and strong grid conditions. The results show that the GFM
performs better under very weak grid conditions than under strong grid
conditions, as indicated by the higher transient current and active-reactive
power coupling observed under the strong grid. Applying a virtual impedance
loop effectively limits the transient current, reduces the power coupling, and
maintains system stability under strong grid conditions, without which the
inverter enters an unstable operating regime. Real-time HIL testing shows that
the developed GFM control strategy, when equipped with the virtual impedance
loop, maintains overall system stability under both very weak grid and strong
grid conditions, providing a practical basis for the future hardware deployment
of GFM technology in renewable energy systems.
Kata Kunci : Power System Stability, Grid-Forming Inverter, Virtual Synchronous Gener ator, Hardware-in-the-Loop, RT Box 2