Laporkan Masalah

Analisis Kinerja Sistem Kontrol Elevator 3 Lantai Berbasis PLC OMRON CQM1H Menggunakan Metode Directional Collective Control

Irsyad Fajar Arya, Ir. Muhammad Arrofiq, S.T., M.T., Ph.D., IPM

2026 | Tugas Akhir | D4 TEKNOLOGI REKAYASA ELEKTRO

Elevator merupakan sarana transportasi vertikal yang kinerjanya sangat bergantung pada metode kontrol yang diterapkan, khususnya dalam efisiensi pelayanan terhadap permintaan pengguna dari berbagai lantai. Metode Non-Directional Collective Control (Non-DCC) yang umum digunakan tidak mampu membedakan arah tujuan pengguna dari luar kabin, sehingga pada kondisi permintaan berlawanan arah, kabin dapat terpaksa berhenti dan berbalik arah sebelum seluruh permintaan searah terlayani. Penelitian ini bertujuan menganalisis dan membandingkan kinerja metode Non-DCC dengan metode Directional Collective Control (DCC) pada sistem kontrol elevator trainer 3 lantai berbasis PLC Omron CQM1H, menggunakan parameter average waiting time (AWT) dan jumlah lintasan sebagai tolok ukur kinerja. Implementasi dilakukan pada dua unit trainer De Lorenzo, DL2122 dan DL2122M, menghasilkan empat varian program ladder diagram yang diprogram menggunakan CX-Programmer dan diunggah ke PLC Omron CQM1H-CPU21. Metode DCC diimplementasikan dengan menambahkan sinyal arah P2 DOWN melalui alih fungsi terminal input yang tersedia, tanpa modifikasi fisik trainer. Pengujian dilakukan menggunakan lima skenario standar, dengan nilai AWT dan jumlah lintasan diukur menggunakan instruksi CNT pada program PLC berbasis clock P_1s. Hasil pengujian menunjukkan bahwa pada kondisi tanpa konflik arah (Skenario 1, 2, dan 5), kedua metode menghasilkan kinerja identik. Pada kondisi permintaan berlawanan arah (Skenario 3 dan 4), DCC secara konsisten lebih efisien dari Non-DCC, dengan peningkatan AWT sebesar 13,8%–37,3?n peningkatan efisiensi jumlah lintasan sebesar 40,0% pada kedua trainer. Konsistensi hasil pada DL2122 dan DL2122M membuktikan bahwa keunggulan DCC tidak bergantung pada karakteristik perangkat keras yang digunakan, melainkan bersumber dari logika directional continuity itu sendiri. Penelitian ini membuktikan bahwa penambahan satu sinyal arah pada sistem kontrol elevator berbasis PLC dapat memberikan dampak signifikan terhadap efisiensi pelayanan elevator secara keseluruhan.

Elevator is one of the essential vertical transportation systems whose performance is highly dependent on the control method applied, particularly in terms of service efficiency toward user requests across multiple floors. The commonly used Non-Directional Collective Control (Non-DCC) method is unable to distinguish the intended travel direction of users calling from outside the cabin, which may cause the cabin to stop and reverse direction before all same-direction requests have been served. This research aims to analyze and compare the performance of the Non-DCC method against the Directional Collective Control (DCC) method on a 3-floor elevator trainer control system based on the Omron CQM1H PLC, using average waiting time (AWT) and number of trips as performance metrics. The implementation was carried out on two De Lorenzo trainer units, DL2122 and DL2122M, producing four ladder diagram program variants programmed using CX-Programmer and uploaded to the Omron CQM1H-CPU21 PLC. The DCC method was implemented by adding a P2 DOWN directional signal through the repurposing of available input terminals, without any physical modification to the trainers. Testing was conducted using five standard scenarios, with AWT and number of trips measured using CNT instructions based on the P_1s clock. The results show that under conditions without directional conflict (Scenarios 1, 2, and 5), both methods produce identical performance. Under opposing-direction request conditions (Scenarios 3 and 4), DCC consistently outperforms Non-DCC, with AWT improvements of 13.8%–37.3% and trip efficiency improvements of 40.0% on both trainers. The consistency of results across DL2122 and DL2122M confirms that DCC's superiority does not depend on the hardware characteristics used, but originates from the directional continuity logic itself. This research demonstrates that adding a single directional signal to a PLC-based elevator control system can significantly improve overall elevator service efficiency.

Kata Kunci : Average Waiting Time, Directional Collective Control, Elevator, Jumlah Lintasan, PLC

  1. D4-2026-497140-abstract.pdf  
  2. D4-2026-497140-bibliography.pdf  
  3. D4-2026-497140-tableofcontent.pdf  
  4. D4-2026-497140-title.pdf