Evaluasi Koefisien Koreksi Truck Count berdasarkan Muatan Efektif pada Volume Overburden (Studi Kasus: PT Bina Sarana Sukses, Kalimantan Selatan)
Nadila Rossyana, Muhammad Iqbal Taftazani, S.T., M.Eng.
2026 | Tugas Akhir | D4 TEKNOLOGI SURVEI DAN PEMETAAN DASAR
Kegiatan pengupasan lapisan tanah penutup (overburden)
merupakan tahap awal dalam penambangan sehingga diperlukan metode perhitungan
volume yang akurat agar jumlah material dapat dicatat sebagai angka produksi
dan dijadikan dasar pembayaran. PT Bina Sarana Sukses
menggunakan dua metode perhitungan volume overburden, yaitu metode
survei dan metode truck count. Selama periode Maret hingga April 2025, ditemukan
adanya selisih antara kedua metode yang pada beberapa periode melebihi batas
toleransi perusahaan sebesar ±2%.
Selisih tersebut muncul karena penggunaan kapasitas vessel standar tidak
selalu merepresentasikan muatan efektif di lapangan, sehingga diperlukan penentuan
koefisien koreksi berbasis data muatan efektif untuk meningkatkan akurasi
perhitungan truck count. Oleh karena itu, proyek akhir ini bertujuan
untuk membandingkan hasil perhitungan volume overburden menggunakan
kedua metode serta mengevaluasi efektivitas penerapan koefisien koreksi dalam
mengurangi selisih volume antara kedua metode dengan uji statistik.
Pelaksanaan proyek akhir dilakukan dengan mengumpulkan data volume overburden
dari metode survei dan metode truck count. Data survei diperoleh
melalui pengukuran topografi menggunakan total station, dan diolah menggunakan perangkat
lunak Surpac 6.6.2. Data ritase pengangkutan overburden dikumpulkan dari
production control selama periode proyek dan direkap menggunakan
Microsoft Excel. Untuk meningkatkan akurasi perhitungan truck count,
dilakukan penentuan muatan efektif dump truck menggunakan sampling
vessel berbasis Global Navigation Satellite System metode Real Time
Kinematic dan pengamatan jumlah bucket per ritase. Berdasarkan
muatan efektif tersebut, dihitung koefisien koreksi yang diterapkan pada
perhitungan truck count. Volume overburden hasil metode survei
dibandingkan dengan truck count standar dan truck count terkoreksi,
disertai analisis selisih volume. Pengujian statistik metode Wilcoxon
Signed-Rank dilakukan terhadap data selisih persentase untuk menilai
signifikansi pengaruh penerapan koefisien koreksi terhadap penurunan selisih
volume.
Hasil proyek akhir menunjukkan bahwa selama delapan minggu ditemukan
selisih volume antara metode survei dan truck count standar berkisar 360,660
BCM (1,069%) hingga 16.405,324 BCM (12,228%). Penerapan koefisien koreksi dapat
menurunkan selisih volume menjadi 53,428 BCM (0,030%) hingga 13.647,616 BCM (11,324%),
dengan enam data mingguan menunjukkan penurunan selisih dan dua data mingguan menunjukkan
peningkatan selisih. Perbedaan hasil antara kedua metode dipengaruhi oleh
faktor teknologi peralatan, pemuatan material, dan kesalahan dalam pengukuran
situasi tambang. Hasil uji statistik menunjukkan bahwa penerapan koefisien
koreksi pada metode truck count dapat menurunkan selisih volume terhadap
metode survei secara signifikan. Berdasarkan hasil proyek akhir ini, truck
count terkoreksi direkomendasikan sebagai metode perhitungan volume overburden
agar hasil perhitungan lebih tepat dan konsisten dalam kegiatan penambangan.
Overburden stripping is the initial stage of mining operations,
requiring an accurate volume calculation method so that the amount of material
can be recorded as production data and used as the basis for payment. PT Bina
Sarana Sukses uses two methods to calculate overburden volume, namely the
survey method and the truck count method. During the period from March to April
2025, differences were found between the two methods, with some periods
exceeding the company's tolerance limit of ±2%. These differences occurred
because the standard vessel capacity did not always represent the effective
load in the field. Therefore, an effective load-based correction coefficient
was required to improve the accuracy of the truck count calculation.
Accordingly, this final project aimed to compare the results of overburden
volume calculations obtained from the two methods and to evaluate the
effectiveness of applying the correction coefficient in reducing the volume
differences between them through statistical testing.
This final project was conducted by collecting overburden volume data
from the survey and truck count methods. The survey data were obtained through
topographic measurements using a total station and processed using Surpac 6.6.2
software. Overburden hauling data were collected from the Production Control
department during the project period and compiled using Microsoft Excel. To
improve the accuracy of the truck count calculation, the effective load of the
dump truck was determined using vessel sampling based on the Global Navigation
Satellite System (GNSS) Real Time Kinematic (RTK) method and observations of
the number of excavator bucket passes per hauling cycle. Based on the effective
load, a correction coefficient was calculated and applied to the truck count
calculation. The overburden volume obtained from the survey method was compared
with the standard truck count and the corrected truck count, followed by an
analysis of the volume differences. The Wilcoxon
Signed-Rank statistical testing was performed using the
percentage differences to evaluate the significance test method of the effect
of applying the correction coefficient on reducing the volume differences.
The results showed that, over the eight-week observation period, the
volume difference between the survey method and the standard truck count ranged
from 360.660 BCM (1.069%) to 16,405.324 BCM (12.228%). The application of the
correction coefficient reduced the volume difference to a range of 53.428 BCM
(0.030%) to 13,647.616 BCM (11.324%), with six weekly observations showing a
decrease in the volume difference and two weekly observations showing an
increase. The differences between the two methods were influenced by equipment
technology, material loading, and errors in topographic measurements.
Statistical testing showed that the application of the correction coefficient
to the truck count method significantly reduced the volume difference relative
to the survey method. Based on these findings, the corrected truck count is
recommended as the preferred method for calculating overburden volume to
provide more accurate and consistent results in mining operations.
Kata Kunci : truck count, overburden, muatan efektif, koefisien koreksi, Wilcoxon Signed-Rank