Laporkan Masalah

Perbandingan Volume Estimasi Dan Aktual Hasil Peledakan (Blasting) Quarry Menggunakan Data Gnss Rtk Dan Fotogrametri Udara (Studi Kasus : Pit Kaorahai, PT Weda Bay Nickel)

Virnanda Nur Mahanani, Ir. Hanif Ilmawan, S.T., M.Eng., IPP

2026 | Tugas Akhir | D4 TEKNOLOGI SURVEI DAN PEMETAAN DASAR

Kegiatan peledakan pada pertambangan terbuka merupakan metode pembongkaran batuan keras yang tidak dapat digali secara mekanis, dengan tujuan memecah massa batuan menjadi ukuran yang dapat dimuat dan diangkut. Salah satu jenis peledakan yang diterapkan dalam konteks ini adalah quarry, yaitu kegiatan penggalian atau pengambilan batuan dari suatu area untuk keperluan operasional internal tambang. Pada praktiknya, volume material hasil peledakan yang direncanakan berdasarkan parameter geometri peledakan sering berbeda dengan volume aktual yang terbentuk di lapangan. Bamford dkk (2020) melaporkan selisih hingga mendekati 50% antara kedua volume tersebut. Perbedaan tersebut berdampak pada evaluasi kinerja peledakan dan perencanaan produksi, sehingga diperlukan pengukuran lapangan yang akurat untuk mengetahui besarnya selisih tersebut secara kuantitatif. Proyek akhir ini dilaksanakan di Pit Kaorahai, PT Weda Bay Nickel, dengan tujuan mengatasi permasalahan ketidaksesuaian volume tersebut melalui perbandingan volume estimasi dan volume aktual hasil peledakan menggunakan data GNSS RTK dan fotogrametri udara 

Proyek akhir ini dilaksanakan dengan menghitung volume estimasi berdasarkan parameter geometri peledakan metode C.J. Konya, menghitung volume aktual menggunakan metode net volume between DTMs dari data GNSS RTK dan fotogrametri udara berbasis UAV, serta menganalisis perbedaan antara keduanya. Data diperoleh dari tiga lokasi pengamatan, yaitu Sub Pit KR 3, KR 3 East, dan KR 8, yang mencakup satu periode kegiatan peledakan. Data topografi sebelum dan sesudah peledakan dari kedua metode pengukuran diolah menjadi Digital Terrain Model (DTM), volume dihitung pada batas area peledakan yang sama. Hasil perhitungan dari masing-masing metode dibandingkan berdasarkan selisih volume, persentase selisih, standar deviasi kumulatif, dan uji signifikansi. Nilai selisih rata-rata hasil perbandingan tersebut dievaluasi terhadap ambang batas toleransi operasional perusahaan sebesar ?3%, yang digunakan sebagai acuan teknis penerimaan hasil pengukuran volume dan diselaraskan dengan SNI 4726:2019.

Hasil perhitungan menunjukkan bahwa volume estimasi pada KR 3, KR 3 East, dan KR 8 masing-masing sebesar 2979,040 BCM (Bank Cubic Meter), 870,800 BCM, dan 5793,750 BCM. Volume aktual GNSS RTK menghasilkan 3126,475 BCM, 884,516 BCM, dan 5820,423 BCM, sedangkan volume aktual fotogrametri udara menghasilkan 3198,920 BCM, 895,337 BCM, dan 5874,518 BCM. Perbandingan volume estimasi terhadap volume GNSS RTK menghasilkan rata-rata persentase selisih sebesar 2,328% (standar deviasi = 2,337%), memenuhi batas toleransi perusahaan ?3%. Sementara itu, perbandingan terhadap volume fotogrametri udara menghasilkan rata-rata persentase selisih sebesar 3,864% (standar deviasi = 3,1276%), melampaui batas toleransi tersebut. Meskipun demikian, hasil uji signifikansi menunjukkan nilai t-hitung pada perbandingan terhadap GNSS RTK sebesar -1,725 dan terhadap fotogrametri udara sebesar -2,140, keduanya lebih kecil dari t-tabel (4,303), sehingga secara statistik tidak terdapat perbedaan yang signifikan antara volume estimasi dan volume aktual pada kedua skema perbandingan.


Blasting operations in open-pit mining are a method of breaking up hard rock that cannot be excavated mechanically, with the aim of breaking the rock mass into sizes that can be loaded and transported. One type of blasting applied in this context is quarrying, which involves the excavation or extraction of rock from an area for the mine’s internal operational needs. In practice, the planned volume of blasted material based on blasting geometry parameters often differs from the actual volume formed in the field. Research reports discrepancies of up to nearly 50?tween these two volumes (Bamford et al., 2020). This discrepancy impacts the evaluation of blasting performance and production planning; therefore, accurate field measurements are required to quantitatively determine the magnitude of this discrepancy. This final project was conducted at the Kaorahai Pit, PT Weda Bay Nickel, with the objective of addressing the issue of volume discrepancies by comparing estimated and actual blast volumes using GNSS RTK and aerial photogrammetry data. 

This final project was carried out by calculating the estimated volume based on the geometric parameters of the C.J. Konya blasting method, calculating the actual volume using the “net volume between DTMs” method from GNSS RTK data and UAV-based aerial photogrammetry, and analyzing the differences between the two. Data were obtained from three observation sites—Sub Pit KR 3, KR 3 East, and KR 8 covering a single blasting period. Topographic data before and after blasting from both measurement methods were processed into Digital Terrain Models (DTMs), and volumes were calculated within the same blasting area boundaries. The calculation results from each method were compared based on volume difference, percentage difference, cumulative standard deviation, and significance tests. The average difference value from these comparisons was evaluated against the company’s operational tolerance threshold of ?3%, which serves as a technical benchmark for accepting volume measurement results and is aligned with SNI 4726:2019.

The calculation results show that the estimated volumes for KR 3, KR 3 East, and KR 8 are 2979,040 BCM (Bank Cubic Meters), 870,800 BCM, and 5793,750 BCM, respectively. The actual volumes measured by GNSS RTK were 3126,475 BCM, 884,516 BCM, and 5820,423 BCM, while the actual volumes measured by aerial photogrammetry were 3198,920 BCM, 895,337 BCM, and 5874,518 BCM. A comparison of the estimated volumes with the GNSS RTK volumes yielded an average percentage difference of 2.328% (standard deviation = 2.337%), meeting the company’s tolerance limit of ?3%. Meanwhile, the comparison with the aerial photogrammetry volume yielded an average percentage difference of 3.864% (standard deviation = 3.1276%), exceeding the tolerance limit. Nevertheless, the results of the significance test showed a calculated t-value of -1.725 for the comparison with GNSS RTK and -2.140 for the comparison with aerial photogrammetry; both values were smaller than the critical t-value (4.303), indicating that there was no statistically significant difference between the estimated and actual volumes in either comparison scheme.


Kata Kunci : fotogrametri udara, GNSS RTK, peledakan, quarry, volume estimasi, volume aktual

  1. D4-2026-499290-abstract.pdf  
  2. D4-2026-499290-bibliography.pdf  
  3. D4-2026-499290-tableofcontent.pdf  
  4. D4-2026-499290-title.pdf