Laporkan Masalah

Performance Analysis of a Solar Charge Controller Based on a SEPIC Converter and P&O MPPT Integrated with a Single-Axis Solar Tracker

Mohammad Abdul Ghany, Dr. Ir. Fahmizal, S.T., M.Sc., IPM

2026 | Tugas Akhir | D4 TEKNOLOGI REKAYASA ELEKTRO

As the global energy transition toward renewable energy sources accelerates, maximizing the efficiency of solar photovoltaic (PV) systems has become increasingly important. This study aims to optimize solar energy harvesting by integrating a Real-Time Clock (RTC)-based single-axis solar tracker with a SEPIC-based Solar Charge Controller (SCC) employing a Perturb and Observe (P&O) Maximum Power Point Tracking (MPPT) algorithm. The proposed system was designed using a 10 Wp Himawari polycrystalline solar module and an IRF540N switching component. However, due to operational anomalies in the switching circuitry of the physical hardware during field testing at the UGM campus, direct empirical data collection was not feasible. Therefore, the validation of electrical parameters, including current, power, and efficiency, was conducted using a theoretical performance estimation approach. The system was evaluated through numerical simulations in MATLAB/Simulink using reconstructed secondary meteorological data obtained from Solcast. The simulation results demonstrate that the proposed system can dynamically track the maximum power point, achieving an estimated peak output power of 4.55 W and a theoretical conversion efficiency of 86.34% under an irradiance level of 550 W/m². Under heavy cloud conditions with a low irradiance level of 49 W/m², the system efficiency theoretically decreased to 60.00%, primarily due to the dominant static power consumption of the microcontroller and gate driver circuits. These findings validate the theoretical robustness and operational feasibility of the integrated system design in maximizing solar energy harvesting despite the hardware limitations encountered in the physical prototype.

As the global energy transition toward renewable energy sources accelerates, maximizing the efficiency of solar photovoltaic (PV) systems has become increasingly important. This study aims to optimize solar energy harvesting by integrating a Real-Time Clock (RTC)-based single-axis solar tracker with a SEPIC-based Solar Charge Controller (SCC) employing a Perturb and Observe (P&O) Maximum Power Point Tracking (MPPT) algorithm. The proposed system was designed using a 10 Wp Himawari polycrystalline solar module and an IRF540N switching component. However, due to operational anomalies in the switching circuitry of the physical hardware during field testing at the UGM campus, direct empirical data collection was not feasible. Therefore, the validation of electrical parameters, including current, power, and efficiency, was conducted using a theoretical performance estimation approach. The system was evaluated through numerical simulations in MATLAB/Simulink using reconstructed secondary meteorological data obtained from Solcast. The simulation results demonstrate that the proposed system can dynamically track the maximum power point, achieving an estimated peak output power of 4.55 W and a theoretical conversion efficiency of 86.34% under an irradiance level of 550 W/m². Under heavy cloud conditions with a low irradiance level of 49 W/m², the system efficiency theoretically decreased to 60.00%, primarily due to the dominant static power consumption of the microcontroller and gate driver circuits. These findings validate the theoretical robustness and operational feasibility of the integrated system design in maximizing solar energy harvesting despite the hardware limitations encountered in the physical prototype.

Kata Kunci : Photovoltaic (PV), Solar Charge Controller (SCC), SEPIC Converter, Maximum Power Point Tracking (MPPT), Perturb and Observe (P&O), Single-Axis Solar Tracker.

  1. D4-2026-498756-abstract.pdf  
  2. D4-2026-498756-bibliography.pdf  
  3. D4-2026-498756-tableofcontent.pdf  
  4. D4-2026-498756-title.pdf