Laporkan Masalah

Pengaruh Jenis Pelarut dan Rasio Bahan Dengan Pelarut Terhadap Sifat Finishing Politur Pada Produk MDF (Medium Density Fiberboard)

DEHAN HIZKIA, Ir. Muhammad Navis Rofii, S.Hut.,M.Sc., Ph.D., IPM.

2025 | Skripsi | KEHUTANAN

Medium Density Fiberboard (MDF) adalah salah satu bahan mebel dan furnitur yang populer dikarenakan permukaannya yang halus dan kekuatan menahan sekrup yang lebih baik dibandingkan dengan papan partikel. MDF perlu diberi perlakuan finishing guna menambah ketahanan dan estetika. Kualitas finishing sangat ditentukan oleh jenis bahan finishing, bahan pelarut serta pencampuran bahan dengan pelarut. Pada penelitian ini dilakukan aplikasi finishing dengan bahan politur pada produk MDF. Tujuan dari penelitian ini adalah untuk mempelajari pengaruh jenis bahan pelarut dan rasio bahan dengan pelarut terhadap kualitas finishing pada papan MDF.
 Rancangan penelitian yang digunakan adalah rancangan acak lengkap dengan percobaan faktorial yang terdiri dari dua faktor yaitu faktor jenis bahan pelarut (berbasis minyak dan berbasis air) dan faktor rasio bahan dengan pelarut (1:1; 1:1,5 dan 1:2). Bahan finishing yang digunakan dalam penelitian adalah bahan finishing politur dan proses pengaplikasian dilakukan dengan tahapan wood filler, sanding sealer dan top coat. Pengujian yang dilakukan untuk mengetahui kualitas finishing meliputi cross cut test berdasarkan acuan ASTM D 3359, coin test berdasarkan acuan PT Sunjaya Coating Perdana, delamination test berdasarkan acuan SNI 01- 5008 dan hardness test berdasarkan acuan ASTM D 3363 serta perubahan warna. Data yang diperoleh kemudian dianalisis dengan analisis varians untuk mengetahui adanya perbedaan yang signifikan.
Hasil penelitian menunjukkan bahwa interaksi antara jenis bahan pelarut dan rasio bahan dengan pelarut berpengaruh signifikan pada hasil color test. Faktor jenis bahan pelarut memberikan pengaruh signifikan terhadap hasil color test, sedangkan faktor rasio jenis bahan dengan pelarut memberikan pengaruh yang signifikan terhadap coin test, cross cut test dan delamination test. Sifat finishing terbaik diperoleh dari perlakuan jenis bahan pelarut air dengan rasio bahan dan pelarut 1:1,5 yang menghasilkan daya lekat dengan tingkat kerusakan 3,67%, nilai fleksibilitas dengan nilai 4,33, luas delaminasi 13,03%, nilai kekerasan sangat baik dengan nilai 6H dan perubahan warna (?E) sebesar 21,44.

Medium Density Fiberboard (MDF) is one of the most popular furniture materials due to its smooth surface and better screw holding strength compared to particleboard. MDF needs to be given a finishing treatment to increase durability and aesthetics. The quality of finishing is largely determined by the type of finishing materials and the mixing of materials with solvents. In this study, the application of finishing with politur material on MDF products was carried out. The purpose of this study was to determine the quality of finishing on MDF boards based on the type of solvent and the ratio of material to solvent used.
The research design used is a complete randomized design with a factorial experiment consisting of two factors, namely the type of solvent- based and water-based, and the ratio of materials to solvents (1: 1; 1: 1.5 and 1: 2). The finishing material used in the research is politur finishing material and the application process is carried out with the stages of wood filler, sanding sealer and top coat. Tests conducted to determine the quality of finishing include cross cut test (ASTM D 3359), coin test (PT Sunjaya Coating Perdana), delamination test (SNI 01-5008), hardness test (ASTM D 3363) and color change. The data obtained were then analyzed by analysis of variance to determine if there were significant differences.
The results of this study indicate an interaction between the type of solvent and the ratio of material to solvent which has a significant effect on the results of the color test. The solvent type factor also has a significant effect on the color test results, while the ratio factor of material type to solvent has a significant effect on the coin test, cross cut test and delamination test. The best finishing properties were obtained from the treatment of water solvent material type with a material and solvent ratio of 1:1.5 with adhesion result 3,67?mage rate, flexibility value with a value of 4,33, delamination area of 13,03%. hardness value result with 6H category and color change (?E) results 21,44.

Kata Kunci : medium density fiberboard, kualitas finishing, bahan pelarut, rasio pelarut, politur

  1. S1-2025-459089-abstract.pdf  
  2. S1-2025-459089-bibliography.pdf  
  3. S1-2025-459089-tableofcontent.pdf  
  4. S1-2025-459089-title.pdf