Pemodelan Desain dan Operasi Pompa Sistem Polder di Kawasan Muara Sungai Dadap
NADYA KHAILIFA, Dr. Ir. Istiarto, M.Eng.
2024 | Skripsi | TEKNIK SIPIL
Salah satu penyebab banjir rob adalah land subsidence di daerah pesisir sehingga air dari sungai maupun laut masuk ke
permukiman, ini diperburuk oleh tingginya curah hujan. Untuk mengatasi masalah
ini, sistem polder dan optimasi pompa perlu diterapkan dengan baik. Metode yang
digunakan mencakup pengumpulan data hidrologi dan hidraulika, analisis
frekuensi, dan pemodelan sistem polder menggunakan perangkat lunak EPA SWMM
5.2. Data curah hujan diperoleh dari Stasiun Soekarno-Hatta (2001—2023) dan data
satelit GPM-IMERG. Data hujan menjadi input rain gage dengan durasi
hujan 5 jam dan kala ulang 5 tahun. Kolam retensi dan konfigurasi pompa dikaji
secara hidraulik untuk menentukan kombinasi yang efektif menurut kesesuaian
performa antarelemen sistem polder, efisien menurut pola kinerja aplikasi pompa
kolam retensi, dan bekerja optimal dalam meminimalkan banjir rob.
Hasil pemodelan menunjukkan bahwa kolam retensi alternatif 1 dengan luas 1.4 ha dan alternatif 2 dengan luas 1.7 ha memiliki kapasitas maksimum sebesar 29917 m³ dan 34500 m³ tanpa aplikasi pompa. Kolam retensi alternatif 1 mengalami overtopping setelah 5 hari. Pola operasi pompa yang didesain konsultan menunjukkan bahwa pompa dengan kapasitas 0.5 m³/s tidak efisien, pola operasi tidak stabil, dan konsumsi energi tinggi. Kombinasi yang dipilih adalah kolam retensi alternatif 2 dengan tiga pompa KSB Amacan K 700-371 berkapasitas 0.25 m³/s.
Implementing the polder system and pump
optimization aims to overcome the problem of tidal flooding, which often occurs
in estuary areas, especially the Dadap River and Tangerang Regency. This tidal
flood problem is caused by land subsidence in coastal areas, causing water from
rivers and the sea to enter settlements, and is exacerbated by high rainfall.
The polder system and pump optimization need to be adequately implemented.
The methods used include hydrological and
hydraulic data collection, frequency analysis, and polder system modeling using
EPA SWMM 5.2 software. Rainfall data is taken from Soekarno-Hatta Station (2001—2023)
and GPM-IMERG satellite data. The rain data is placed to be input to a rain
gage with a rain duration of 5 hours and a return period of 5 years. In
addition, alternative retention ponds and pump configurations are analyzed to
determine effective and efficient combinations that work optimally in minimizing
the potential for tidal flooding.
The modeling simulation results show that
alternative 1 retention pond with an area of 1.4 ha and alternative 2 with
a 1.7 ha has a maximum capacity of 29917 m³ and 34500 m³ without
pump application—alternative 1 retention pond experienced overtopping after
simulating for five days. Consultant pump operation patterns show that pumps
with a capacity of 0.5 m³/s are inefficient, with unstable operating
patterns and high energy consumption. The combination chosen was alternative
retention pond 2 with three KSB Amacan K 700-371 pumps with a capacity of 0.25 m³/s.
Kata Kunci : Banjir Rob Land Subsidence, Sistem Polder, Kolam Retensi, Pompa