Laporkan Masalah

Pengaruh Penggunaan Bresing Baja Terhadap Perilaku Struktur Gedung Apartemen 21 Lantai

LIVETA NISSI RAMADHANTI, Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU, ACPE

2024 | Skripsi | TEKNIK SIPIL

Indonesia berada di zona yang rawan gempa bumi karena lerletak di pertemuan tiga lempeng bumi utama, yaitu Eurasia, Indo-Australia, dan Pasifik.. Hal tersebut membuat bangunan gedung, khususnya gedung hotel dan apartemen setinggi 21 lantai harus dirancang lebih kaku dengan menggunakan sistem penahan beban lateral, seperti sistem dinding geser atau sistem bresing baja. Dalam perancangan ini, dipilih sistem bresing baja untuk menggantikan sistem dinding geser yang ada guna meningkatkan kekakuan struktur sehingga dapat dibandingkan perilaku struktur dari kedua sistem pengaku.

Struktur gedung yang ditinjau dalam penelitian terdiri atas 21 lantai dengan tinggi 64,2 m. Elemen struktur yang dimodelkan menggunakan perangkat lunak ETABS v20.3.0 meliputi kolom, balok, tangga, pelat lantai, dinding geser dan bresing baja untuk menganalisis perilaku struktur dan gaya-gaya dalam yang terjadi pada elemen-elemen struktur. Struktur dimodelkan ke dalam dua model, yaitu model 1 berupa struktur eksisting dengan sistem dinding geser dan model 2 berupa struktur eksisting dengan sistem bresing baja kombinasi pola x dan pola diagonal sebagai pengganti dinding geser. 

Hasil perancangan meliputi parameter perilaku struktur seperti periode fundamental struktur, mode shape, dan simpangan antar lantai pada kedua model serta dilakukan pengecekan sesuai SNI 1726:2019. Nilai periode fundamental (T) yang didapatkan pada model 2 sebesar 1,854 detik dan model 1 sebesar 2,578 detik. Nilai model 2 lebih kecil dibandingkan model 1. Akan tetapi, kedua periode fundamental model telah memenuhi persyaratan periode maksimum. Selain itu, kedua struktur memenuhi persyaratan mode shape. Model 1 tidak memenuhi persyaratan selisih simpangan maksimum antar lantai sedangkan model 2 memenuhi. Nilai defleksi maksimum pada lantai teratas arah-x untuk Model 1 dan 2 masing-masing adalah 107,94 mm dan 106,82 mm. Pada arah-y, nilai defleksi maksimum masing-masing adalah 158,84 mm dan 149,96 mm untuk Model 1 dan 2. Dari parameter tersebut, model 2 struktur dengan sistem bresing dapat dikatakan lebih efektif.


Indonesia is located in an earthquake-prone zone due to its position at the convergence of three major tectonic plates: the Eurasian, Indo-Australian, and Pacific plates. This necessitates designing buildings, particularly 21-story hotels and apartments, with greater rigidity using lateral load-resisting systems such as shear wall systems or steel bracing systems. In this design, a steel bracing system is chosen to replace the existing shear wall system to enhance structural stiffness, allowing a comparison of structural behavior between the two reinforcement systems.

The building structure reviewed in this study consists of 21 stories with a height of 64.2 meters. Structural elements are modelled using ETABS v20.3.0 software, including columns, beams, stairs, floor slabs, shear walls, and steel bracing, to analyze the structural behavior and internal forces occurring in the structural elements. The structure is modelled into two configurations: Model 1 represents the existing structure with a shear wall system, and Model 2 represents the existing structure with a steel bracing system using a combination of X-pattern and diagonal-pattern bracing as a replacement for the shear walls.

The design results include structural behavior parameters such as the fundamental period of the structure, mode shape, and inter-story drift for both models, verified according to SNI 1726:2019. The fundamental period (T) for Model 2 is 1.854 seconds, while for Model 1 it is 2.578 seconds. Although Model 2 has a shorter fundamental period compared to Model 1, both models satisfy the maximum period requirements. Additionally, both structures meet the mode shape requirements. Model 1 does not meet the maximum inter-story drift requirement, whereas Model 2 does. The maximum deflection at the top floor in the x-direction for Models 1 and 2 is 107.94 mm and 106.82 mm, respectively. In the y-direction, the maximum deflection for Models 1 and 2 is 158.84 mm and 149.96 mm, respectively. Based on these parameters, the Model 2 structure with the bracing system can be considered more effective.


Kata Kunci : dinding geser, bresing baja, ETABS, perilaku struktur, analisis dinamik

  1. S1-2024-463561-abstract.pdf  
  2. S1-2024-463561-bibliography.pdf  
  3. S1-2024-463561-tableofcontent.pdf  
  4. S1-2024-463561-title.pdf