PENGARUH KONSENTRASI LARUTAN PADA MORFOLOGI, SIFAT OPTIK DAN KONDUKTIVITAS NANOFIBER PEO BLEND PEDOT:PSS
IMAM ALVARO GARCIA, Dr. Eng Kuwat Triyana, M.Si ; Dr. Chotimah
2017 | Skripsi | S1 FISIKANanofiber Polyethylene oxide (PEO) dengan beberapa konsentrasi dalam larutan telah berhasil difabrikasi menggunakan metode electrospinning. PEO mempunyai viskositas tinggi tetapi konduktivitasnya rendah. Karena hal ini PEO dicampur dengan polimer konduktif. Polimer konduktif yang digunakan yaitu Poly (3,4- ethylene-dioxytriophene) : Poly styrene sulfonate (PEO/PEDOT:PSS). Setelah proses pencampuran dan pabrikasi nanofiber, dilakukan uji sifat listrik menggunakan IV-METER, melihat morfologi nanofiber dengan SEM, dan karakterisasi serapan optik dengan UV-VIS. Dari hasil IV-METER diperoleh perbedaan yang signifikan antara PEO/PEDOT:PSS dengan nanofiber PEO. Nilai konduktivitas PEO 7% wt adalah 7,4 x 10-8 S/cm dan PEO/PEDOT:PSS 4:1 adalah 4,02 x 10-6 S/cm. Hasil SEM menunjukkan terbentuknya nanofiber PEO 7%wt berukuran 250 nm dan PEO/PEDOT:PSS 4:1 berukuran 200 nm. Kemudian dari hasil UV ����¯�¿�½������¢������¯������¿������½������¯������¿������½ VIS didapat nilai absorbansi tiap sampel. Penelitian ini bisa dilanjutkan pada tahap aplikasi, salah satunya sebagai material sensing pada sensor.
Nanofiber Polyethylene Oxide (PEO) with various concentration has been succesfuly fabricated by electrospinning method. PEO has high viscosity yet low conductivity. Because of this, PEO blended with conductive polymer Poly (3,4- ethylene-dioxytriophene) : Poly styrene sulfonate (PEO/PEDOT:PSS). After mixing process and fabricating nanofiber, it was characterized by several instrument. Conductivity characterisation with IV-METER, morfology characterisation with SEM, and optical property with UV-VIS. Result of IV-METER shows significant difference between nanofiber PEO with nanofiber PEO/PEDOT:PSS. Conductivity of nanofiber PEO 7% wt is 7,4 x 10- 8 S/cm, while PEO/PEDOT:PSS 4:1 is 4,02 x 10-6 S/cm. SEM characterisation shows nanofiber formed with diameter 250nm for PEO 7% and diameter 200 nm for PEO/PEDOT:PSS 5:1. From UV ����¯�¿�½������¢������¯������¿������½������¯������¿������½ VIS characterisation, we get absorbance value from each sample.This research can be contiue to application step,such as material sensing for sensor.
Kata Kunci : Keywords: PEO, PEDOT:PSS, nanofiber, electrospinning, conductivity