Laporkan Masalah

Prarancangan Pabrik Anhidrid Asam Asetat dari Aseton dan Asam Asetat dengan Kapasitas 30.000 Ton/Tahun

MITA KUSUMANINGRUM, Muslikhin Hidayat, S.T., M.T., Ph.D.

2016 | Skripsi | S1 TEKNIK KIMIA

Asetat anhidrid dibuat dengan mereaksikan ketene yang diperoleh dari thermal cracking aseton dengan asam asetat pada reaktor packed bed yang dijalankan isothermal bersuhu 80 oC dan bertekanan 1 atm. Pabrik dirancang dengan kapasitas 30.000 ton per tahun dan menghasilkan produk dengan kemurnian 99% dengan kebutuhan asam asetat sebanyak 17.949,22 ton per tahun serta aseton sebanyak 21.334,12 ton per tahun. Kebutuhan utilitas meliputi air sebanyak 150.798,9 ton per tahun, listrik 0,1012 MVA, bahan bakar berupa fuel oil nomor 2 sebanyak 1.478,1365 ton per tahun dan udara tekan (STP) sebanyak 940.896 m3 per tahun Pabrik ini direncanakan didirikan pada tahun 2018 di kawasan industri Bawen, Semarang, Jawa Tengah. Luas tanah yang digunakan sebanyak 1,4 Ha termasuk untuk perkantoran dan perluasan area pabrik. Pabrik bekerja secara kontinu selama 24 jam per hari selama 330 hari per tahun. Kebutuhan modal tetap sebesar Rp 226.200.342.509,85 + $ 15,024,898.86 dan modal kerja sebesar Rp 11.932.003.537,36 + $ 13,254,056.05 . Laba sebelum pajak sebesar Rp 113.479.355.932,43 dan setelah pajak Rp 66.739.677.966,22 . Rate of Investment (ROI) sebelum pajak 30,91% dan setelah pajak 15,45%. Pay Out Time (POT) sebelum pajak 2,44 tahun dan setelah pajak 3,93 tahun. Break Even Point (BEP) sebesar 47,48% dari kapasitas maksimum produksi sedangkan Shut Down Point (SDP) sebesar 26,08%. Dengan pertimbangan sifat bahan baku dan produk, kondisi operasi, adanya konsumen yang membutuhkan, dan sudah berdirinya pabrik sejenis di dunia, maka pabrik ini digolongkan sebagai pabrik beresiko rendah. Batasan yang berlaku adalah nilai BEP 40-60% untuk pabrik di Indonesia, ROI minimum 11%, POT maksimum 5 tahun dan Discounted cash flow rate of return (DCFRR) yang lebih tinggi dari suku bunga bank. Berdasarkan hasil analisa ekonomi dan batasan yang berlaku, maka dapat disimpulkan bahwa pabrik asetat anhidrid dari aseton dan asam asetat dengan kapasitas 30.000 ton per tahun ini menarik untuk dikaji lebih lanjut.

Acetic anhydride is produced by reacting of ketene that prepared by thermal cracking of acetone with acetic acid in the isothermal packed bed reactor at the temperature 80°C and pressure 1 atm. The plant will be designed for 30.000 tons per year capacity and produces acetic anhydride with 99% purity. The need for production are 17,949.22 tons per year of acetic acid and 21,334.12 tons per year of acetone. The utilities needs are 150,798.8592 tons per year of water, 0.1012 MVA of electricity, 23,142.24 tons per year of fuel oil number 2 and compressed air (STP) as much as 940,896 m3 per year. This plant will be built in 2018 in Bawen industrial area, Semarang, Central Java. Total land area used is 1,4 ha including for offices and the expansion of the plant area. Plant will operate continuously 24 hours per day, 330 days per year. Fixed capital investment (FCI) of the plant is Rp226.200.342.509,85 + $15,024,898.86 and working capital is Rp11.932.003.537,36 + $13,254,056.05. Profit before tax is Rp113.479.355.932,43 and profit after tax is Rp 66.739.677.966,22. Rate of Investment (ROI) before tax is 30.91% and ROI after tax is 15.45%. Pay Out Time (POT) before tax is 2.44 years and POT after tax is 3.93 years. Break Even Point (BEP) is 47.48% of the maximum production capacity while the Shut Down Point (SDP) is 26.08%. In consideration to the properties of the raw materials and products, operating conditions, the consumer needs, and the establishment of the plant in the world, this plant is classified as low-risk plant. The economic constraints that apply for the plant in Indonesia are the BEP value of 40- 60%, a minimum ROI of 11%, POT maximum of 5 years and a Discounted Cash Flow Rate Of Return (DCFRR) must be higher than the bank rate. Based on the economic analysis and the constraints, it can be concluded that the plant of Acetic Anhydride from Acetone and Acetic Acid with of 30,000 tons per year a capacity is exciting to be studied further.

Kata Kunci : Anhidrid asam asetat, asam asetat, aseton

  1. S1-2016-330086-abstract.pdf  
  2. S1-2016-330086-bibliography.pdf  
  3. S1-2016-330086-tableofcontent.pdf  
  4. S1-2016-330086-title.pdf