Laporkan Masalah

Perancangan Mesin Pencacah Plastik

IKHSAN NURHUDA P W, Dr. Benidiktus Tulung Prayoga, S.T.,M.T.

2021 | Tugas Akhir | D3 TEKNIK MESIN

Salah satu dari permasalahan masyarakat negeri ini adalah limbah plastik. Karena plastik memiliki sifat yang sulit diurai bakteri pengurai yang bearda didalam tanah dan membutuhkan waktu yang lama untuk terurai secara sempurna. metode yang dilakukan untuk menanggulangi limbah plastik didalam masyarakat adalah pemilahan, penimbunan dan pembakaran sampah plastik. Metode yang dilakukan oleh masyarakat untuk mengatasi limbah plastik tersebut kurang efektif dan berbahaya bagi lingkungan terutama metode pembakaran dan penimbunan . metode efektif dan bisa menghasilkan berbagai manfaat adalah metode recycle atau pengolahan kembali akan tetapi metode tersebut jarang digunakan masyarakat. Tugas akhir ini merancang mesin pencacah plastik yang bertujuan memudahkan plasttik bisa diolah kembali. Mesin pencacah plastik ini memiliki pisau pencacah yang berjumlah 28 buah yang terdiri dari 14 pisau gerak yang bergerak mengikuti putaran poros dan 14 pisau tetap yang menempel pada rangka mesin. Perancangan mesin pencacah plastik ini meliputi analisa beban pencacahan, perancangan komponen, pemilihan material, dan pemilihan komponen. Dari hasil rancangan diperoleh daya pemotongan plastik P = 2,9 kW dan digunakan motor listrik 3 kW 3 phase dengan output speed 75 rpm.

One of the problems faced by the people of this country is plastic waste. Because plastics have properties that are difficult to break down by decomposing bacteria that bury the soil and take a long time to decompose completely. methods used to tackle plastic waste in society are sorting, hoarding, and burning plastic waste. The methods used by the community to deal with plastic waste are less effective and harmful to the environment, especially methods of burning and landfilling. an effective method that can produce various benefits is the recycling method, but this method is rarely used by the community. This final project is to design a plastic chopping machine that aims to make it easier for plastic to be reprocessed. This plastic chopping machine has 28 chopping blades consisting of 14 motion blades that move along the shaft and 14 fixed blades attached to the machine frame. The design of this plastic chopping machine includes analysis of the chopping load, designing components, selecting materials, and selecting components. From the design results, the cutting power of plastic is P = 2.9 kW, and a 3 kW 3 phase electric motor with an output speed of 75 rpm is used.

Kata Kunci : Mesin pencacah sampah plastik, daur ulang, mesin pencacah sampah plastik.

  1. D3-2021-384684-abstract.pdf  
  2. D3-2021-384684-bibliography.pdf  
  3. D3-2021-384684-tableofcontent.pdf  
  4. D3-2021-384684-title.pdf